WampServer

bonjour
j'ai un petit probléme quand je lance wamp je n'arrive pas à activé le serveur mysql .
voici les log mysql
090928 21:14:22 [Note] Plugin 'InnoDB' is disabled.
090928 21:14:22 [Note] Plugin 'FEDERATED' is disabled.
090928 21:14:22 [ERROR] wampmysqld: unknown option '--skip-bdb'
090928 21:14:22 [ERROR] Aborting

090928 21:14:22 [Warning] Forcing shutdown of 2 plugins
090928 21:14:23 [Note] wampmysqld: Shutdown complete

090928 21:17:54 [Note] Plugin 'InnoDB' is disabled.
090928 21:17:54 [Note] Plugin 'FEDERATED' is disabled.
090928 21:17:54 [ERROR] wampmysqld: unknown option '--skip-bdb'
090928 21:17:54 [ERROR] Aborting

090928 21:17:54 [Warning] Forcing shutdown of 2 plugins
090928 21:17:54 [Note] wampmysqld: Shutdown complete

090928 21:27:10 [Note] Plugin 'InnoDB' is disabled.
090928 21:27:10 [Note] Plugin 'FEDERATED' is disabled.
090928 21:27:10 [ERROR] wampmysqld: unknown option '--skip-bdb'
090928 21:27:10 [ERROR] Aborting

090928 21:27:10 [Warning] Forcing shutdown of 2 plugins
090928 21:27:10 [Note] wampmysqld: Shutdown complete


merci est passé une bonne soirée

> 090928 21:17:54 [ERROR] wampmysqld: unknown option '--skip-bdb'

Le fichier wamp\bin\mysql\mysql5.1.xy\my.ini a une option "skip-bdb" qui n'existe pas.

Éditer le fichier susmentionné pour supprimer cette ligne.

---------------------------------------------------------------
Documentation Apache - Documentation PHP - Documentation MySQL - Wampserver install files & addons

bonjour merci mais j'ai pas trouver le ligne dans my.ini
# Example MySQL config file for medium systems.
#
# This is for a system with little memory (32M - 64M) where MySQL plays
# an important part, or systems up to 128M where MySQL is used together with
# other programs (such as a web server)
#
# You can copy this file to
# /etc/my.cnf to set global options,
# mysql-data-dir/my.cnf to set server-specific options (in this
# installation this directory is C:\mysql\data) or
# ~/.my.cnf to set user-specific options.
#
# In this file, you can use all long options that a program supports.
# If you want to know which options a program supports, run the program
# with the "--help" option.

# The following options will be passed to all MySQL clients
[client]
#password = your_password
port = 3306
socket = /tmp/mysql.sock

# Here follows entries for some specific programs

# The MySQL server
[wampmysqld]
port = 3306
socket = /tmp/mysql.sock
skip-locking
key_buffer = 16M
max_allowed_packet = 1M
table_cache = 64
sort_buffer_size = 512K
net_buffer_length = 8K
read_buffer_size = 256K
read_rnd_buffer_size = 512K
myisam_sort_buffer_size = 8M
basedir=c:/wamp/bin/mysql/mysql5.1.36
log-error=c:/wamp/logs/mysql.log
datadir=c:/wamp/bin/mysql/mysql5.1.36/data

# Don't listen on a TCP/IP port at all. This can be a security enhancement,
# if all processes that need to connect to mysqld run on the same host.
# All interaction with mysqld must be made via Unix sockets or named pipes.
# Note that using this option without enabling named pipes on Windows
# (via the "enable-named-pipe" option) will render mysqld useless!
#
#skip-networking

# Disable Federated by default
skip-federated

# Replication Master Server (default)
# binary logging is required for replication
log-bin=mysql-bin

# binary logging format - mixed recommended
binlog_format=mixed

# required unique id between 1 and 2^32 - 1
# defaults to 1 if master-host is not set
# but will not function as a master if omitted
server-id = 1

# Replication Slave (comment out master section to use this)
#
# To configure this host as a replication slave, you can choose between
# two methods :
#
# 1) Use the CHANGE MASTER TO command (fully described in our manual) -
# the syntax is:
#
# CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,
# MASTER_USER=<user>, MASTER_PASSWORD=<password> ;
#
# where you replace <host>, <user>, <password> by quoted strings and
# <port> by the master's port number (3306 by default).
#
# Example:
#
# CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,
# MASTER_USER='joe', MASTER_PASSWORD='secret';
#
# OR
#
# 2) Set the variables below. However, in case you choose this method, then
# start replication for the first time (even unsuccessfully, for example
# if you mistyped the password in master-password and the slave fails to
# connect), the slave will create a master.info file, and any later
# change in this file to the variables' values below will be ignored and
# overridden by the content of the master.info file, unless you shutdown
# the slave server, delete master.info and restart the slaver server.
# For that reason, you may want to leave the lines below untouched
# (commented) and instead use CHANGE MASTER TO (see above)
#
# required unique id between 2 and 2^32 - 1
# (and different from the master)
# defaults to 2 if master-host is set
# but will not function as a slave if omitted
#server-id = 2
#
# The replication master for this slave - required
#master-host = <hostname>
#
# The username the slave will use for authentication when connecting
# to the master - required
#master-user = <username>
#
# The password the slave will authenticate with when connecting to
# the master - required
#master-password = <password>
#
# The port the master is listening on.
# optional - defaults to 3306
#master-port = <port>
#
# binary logging - not required for slaves, but recommended
#log-bin=mysql-bin

# Point the following paths to different dedicated disks
#tmpdir = /tmp/
#log-update = /path-to-dedicated-directory/hostname

# Uncomment the following if you are using InnoDB tables
#innodb_data_home_dir = C:\mysql\data/
#innodb_data_file_path = ibdata1:10M:autoextend
#innodb_log_group_home_dir = C:\mysql\data/
#innodb_log_arch_dir = C:\mysql\data/
# You can set .._buffer_pool_size up to 50 - 80 %
# of RAM but beware of setting memory usage too high
#innodb_buffer_pool_size = 16M
#innodb_additional_mem_pool_size = 2M
# Set .._log_file_size to 25 % of buffer pool size
#innodb_log_file_size = 5M
#innodb_log_buffer_size = 8M
#innodb_flush_log_at_trx_commit = 1
#innodb_lock_wait_timeout = 50

[mysqldump]
quick
max_allowed_packet = 16M

[mysql]
no-auto-rehash
# Remove the next comment character if you are not familiar with SQL
#safe-updates

[isamchk]
key_buffer = 20M
sort_buffer_size = 20M
read_buffer = 2M
write_buffer = 2M

[myisamchk]
key_buffer = 20M
sort_buffer_size = 20M
read_buffer = 2M
write_buffer = 2M

[mysqlhotcopy]
interactive-timeout

[mysqld]
port=3306

Bonjour,

Il ne doit y avoir qu'un SEUL fichier my.ini qui doit être : wamp\bin\mysql\mysql5.1.xy\my.ini avec xy numéro de version MySQL utilisé.

Vérifiez et supprimez tout autre fichier my.ini où que ce soit.

---------------------------------------------------------------
Documentation Apache - Documentation PHP - Documentation MySQL - Wampserver install files & addons

bonjour j'ai cherché non je n'est pas d'autre my.ini