WampServer
Apache, PHP, MySQL
on Windows
dozens of errors in application logs
Posted by:
LivingThis
(---.cm-6-1d.dynamic.ziggo.nl)
Date: June 11, 2016 11:15AM
Sorry to ask this but.
I have an orange wamp icon.
mysql is running, but apache not
I have several errors in the windows application log files.
I had them before and rebooted.
now I see the same kind of errors:
1)
Can not access file I: \ wamp \ bin \ php \ php5.5.12 \ ext \ php_intl.dll for one of the following reasons: There is a problem with the network, with the disk where the file is stored with the storage drivers on this computer, or the disk is missing. Program Apache HTTP Server was shut down due to this error.
Program: Apache HTTP Server
File: I: \ wamp \ bin \ php \ php5.5.12 \ ext \ php_intl.dll
The error value is displayed in the section Additional information.
user Action
1. Open the file again. This may be a temporary problem that will resolve itself when the program is run.
2. If access to the file is still not possible and
- If the file is in the network, the network administrator must verify that there is no problem with the network and connect to the server can be made.
- If the file is on a removable disk such as a floppy disk or CD-ROM, you should check whether this disc is properly inserted into the drive.
3. Check and repair the file with CHKDSK. Click on Start, Run and type CMD. Click OK and type CHKDSK / F at the command prompt. then press ENTER.
4. If the problem persists, you must restore the file from a backup medium.
5. Determine whether other files can be opened on the same disk. If not, the disk is damaged. If it is a hard disk, contact your network administrator or hardware vendor for support.
Additional information
Error value: C00000B5
Type drive: 2
2)
Name of application with error: httpd.exe, version 2.4.9.0, time stamp: 0x532585f0
Name of module error: ntdll.dll, version 6.3.9600.18233, time stamp: 0x56bb4e1d
Exception code: 0xc0000006
Margin of error: 0x00057241
ID of process error: 0x1a84
Start time of application with error: 0x01d1c3b8d13c31f6
Path to application with error: I: \ wamp \ bin \ apache \ apache2.4.9 \ bin \ httpd.exe
Path to module error: C: \ WINDOWS \ SYSTEM32 \ ntdll.dll
Report ID: 501a41fb-2fac-11e6-bfd4-d43d7e6cc719
Full package name with error:
Relative application ID packet with error:
3)
Can not access file I: \ wamp \ bin \ php \ php5.5.12 \ ext \ php_imap.dll for one of the following reasons: There is a problem with the network, with the disk where the file is stored with the storage drivers on this computer, or the disk is missing. Program Apache HTTP Server was shut down due to this error.
Program: Apache HTTP Server
File: I: \ wamp \ bin \ php \ php5.5.12 \ ext \ php_imap.dll
The error value is displayed in the section Additional information.
user Action
1. Open the file again. This may be a temporary problem that will resolve itself when the program is run.
2. If access to the file is still not possible and
- If the file is in the network, the network administrator must verify that there is no problem with the network and connect to the server can be made.
- If the file is on a removable disk such as a floppy disk or CD-ROM, you should check whether this disc is properly inserted into the drive.
3. Check and repair the file with CHKDSK. Click on Start, Run and type CMD. Click OK and type CHKDSK / F at the command prompt. then press ENTER.
4. If the problem persists, you must restore the file from a backup medium.
5. Determine whether other files can be opened on the same disk. If not, the disk is damaged. If it is a hard disk, contact your network administrator or hardware vendor for support.
Additional information
Error value: C00000B5
Type drive: 2
4)
Name of application with error: httpd.exe, version 2.4.9.0, time stamp: 0x532585f0
Name of module error: php_imap.dll, Version: 5.5.12.0, timestamp: 0x5361414c
Exception code: 0xc0000006
Margin of error: 0x000147a0
ID of process error: 0x18f4
Start time of application with error: 0x01d1c3b7965b295b
Path to application with error: I: \ wamp \ bin \ apache \ apache2.4.9 \ bin \ httpd.exe
Path to module error: I: \ wamp \ bin \ php \ php5.5.12 \ ext \ php_imap.dll
Report ID: d929ff23-2fab-11e6-bfd4-d43d7e6cc719
Full package name with error:
Relative application ID packet with error:
5)
Can not find the description of event ID 100 from source MySQL. The part that the event has started may not be installed on the local computer, or the installation is damaged. You can install or repair the component on the local computer.
If the event is coming from a different computer, the display information had to be stored at the event.
The following information is included in the event:
InnoDB: File \ ibdata1:. "Windows aio 'returned OS error 1210. Can not continuous operation
the message resource is present but the message can not be found in the string / message table
6)
Can not access file I: \ wamp \ bin \ php \ php5.5.12 \ ext \ php_imap.dll for one of the following reasons: There is a problem with the network, with the disk where the file is stored with the storage drivers on this computer, or the disk is missing. CLI program ended because of this error.
Program: CLI
File: I: \ wamp \ bin \ php \ php5.5.12 \ ext \ php_imap.dll
The error value is displayed in the section Additional information.
user Action
1. Open the file again. This may be a temporary problem that will resolve itself when the program is run.
2. If access to the file is still not possible and
- If the file is in the network, the network administrator must verify that there is no problem with the network and connect to the server can be made.
- If the file is on a removable disk such as a floppy disk or CD-ROM, you should check whether this disc is properly inserted into the drive.
3. Check and repair the file with CHKDSK. Click on Start, Run and type CMD. Click OK and type CHKDSK / F at the command prompt. then press ENTER.
4. If the problem persists, you must restore the file from a backup medium.
5. Determine whether other files can be opened on the same disk. If not, the disk is damaged. If it is a hard disk, contact your network administrator or hardware vendor for support.
Additional information
Error value: C00000B5
Type drive: 2
7)
Name of application with error: php win.exe, Version: 5.5.12.0, timestamp: 0x53613fd9
Name of module error: php_imap.dll, Version: 5.5.12.0, timestamp: 0x5361414c
Exception code: 0xc0000006
Margin of error: 0x000147a0
ID of process error: 0x1bfc
Start time of application with error: 0x01d1c3b70bc86bdc
Path to application with error: I: \ wamp \ bin \ php \ php5.5.12 \ php win.exe
Path to module error: I: \ wamp \ bin \ php \ php5.5.12 \ ext \ php_imap.dll
Report ID: d34a0851-2faa-11e6-bfd4-d43d7e6cc719
Full package name with error:
Relative application ID packet with error:
8)
Can not access file I: \ wamp \ bin \ php \ php5.5.12 \ ext \ php_intl.dll for one of the following reasons: There is a problem with the network, with the disk where the file is stored with the storage drivers on this computer, or the disk is missing. CLI program ended because of this error.
Program: CLI
File: I: \ wamp \ bin \ php \ php5.5.12 \ ext \ php_intl.dll
The error value is displayed in the section Additional information.
user Action
1. Open the file again. This may be a temporary problem that will resolve itself when the program is run.
2. If access to the file is still not possible and
- If the file is in the network, the network administrator must verify that there is no problem with the network and connect to the server can be made.
- If the file is on a removable disk such as a floppy disk or CD-ROM, you should check whether this disc is properly inserted into the drive.
3. Check and repair the file with CHKDSK. Click on Start, Run and type CMD. Click OK and type CHKDSK / F at the command prompt. then press ENTER.
4. If the problem persists, you must restore the file from a backup medium.
5. Determine whether other files can be opened on the same disk. If not, the disk is damaged. If it is a hard disk, contact your network administrator or hardware vendor for support.
Additional information
Error value: C00000B5
Type drive: 2
9)
Name of application with error: php win.exe, Version: 5.5.12.0, timestamp: 0x53613fd9
Name of module error: ntdll.dll, version 6.3.9600.18233, time stamp: 0x56bb4e1d
Exception code: 0xc0000006
Margin of error: 0x00057241
ID of process error: 0xc9c
Start time of application with error: 0x01d1c3b4173f350b
Path to application with error: I: \ wamp \ bin \ php \ php5.5.12 \ php win.exe
Path to module error: C: \ WINDOWS \ SYSTEM32 \ ntdll.dll
Report Id: 8176332b-2fa8-11e6-bfd3-d43d7e6cc719
Full package name with error:
Relative application ID packet with error:
I have an orange wamp icon.
mysql is running, but apache not
I have several errors in the windows application log files.
I had them before and rebooted.
now I see the same kind of errors:
1)
Can not access file I: \ wamp \ bin \ php \ php5.5.12 \ ext \ php_intl.dll for one of the following reasons: There is a problem with the network, with the disk where the file is stored with the storage drivers on this computer, or the disk is missing. Program Apache HTTP Server was shut down due to this error.
Program: Apache HTTP Server
File: I: \ wamp \ bin \ php \ php5.5.12 \ ext \ php_intl.dll
The error value is displayed in the section Additional information.
user Action
1. Open the file again. This may be a temporary problem that will resolve itself when the program is run.
2. If access to the file is still not possible and
- If the file is in the network, the network administrator must verify that there is no problem with the network and connect to the server can be made.
- If the file is on a removable disk such as a floppy disk or CD-ROM, you should check whether this disc is properly inserted into the drive.
3. Check and repair the file with CHKDSK. Click on Start, Run and type CMD. Click OK and type CHKDSK / F at the command prompt. then press ENTER.
4. If the problem persists, you must restore the file from a backup medium.
5. Determine whether other files can be opened on the same disk. If not, the disk is damaged. If it is a hard disk, contact your network administrator or hardware vendor for support.
Additional information
Error value: C00000B5
Type drive: 2
2)
Name of application with error: httpd.exe, version 2.4.9.0, time stamp: 0x532585f0
Name of module error: ntdll.dll, version 6.3.9600.18233, time stamp: 0x56bb4e1d
Exception code: 0xc0000006
Margin of error: 0x00057241
ID of process error: 0x1a84
Start time of application with error: 0x01d1c3b8d13c31f6
Path to application with error: I: \ wamp \ bin \ apache \ apache2.4.9 \ bin \ httpd.exe
Path to module error: C: \ WINDOWS \ SYSTEM32 \ ntdll.dll
Report ID: 501a41fb-2fac-11e6-bfd4-d43d7e6cc719
Full package name with error:
Relative application ID packet with error:
3)
Can not access file I: \ wamp \ bin \ php \ php5.5.12 \ ext \ php_imap.dll for one of the following reasons: There is a problem with the network, with the disk where the file is stored with the storage drivers on this computer, or the disk is missing. Program Apache HTTP Server was shut down due to this error.
Program: Apache HTTP Server
File: I: \ wamp \ bin \ php \ php5.5.12 \ ext \ php_imap.dll
The error value is displayed in the section Additional information.
user Action
1. Open the file again. This may be a temporary problem that will resolve itself when the program is run.
2. If access to the file is still not possible and
- If the file is in the network, the network administrator must verify that there is no problem with the network and connect to the server can be made.
- If the file is on a removable disk such as a floppy disk or CD-ROM, you should check whether this disc is properly inserted into the drive.
3. Check and repair the file with CHKDSK. Click on Start, Run and type CMD. Click OK and type CHKDSK / F at the command prompt. then press ENTER.
4. If the problem persists, you must restore the file from a backup medium.
5. Determine whether other files can be opened on the same disk. If not, the disk is damaged. If it is a hard disk, contact your network administrator or hardware vendor for support.
Additional information
Error value: C00000B5
Type drive: 2
4)
Name of application with error: httpd.exe, version 2.4.9.0, time stamp: 0x532585f0
Name of module error: php_imap.dll, Version: 5.5.12.0, timestamp: 0x5361414c
Exception code: 0xc0000006
Margin of error: 0x000147a0
ID of process error: 0x18f4
Start time of application with error: 0x01d1c3b7965b295b
Path to application with error: I: \ wamp \ bin \ apache \ apache2.4.9 \ bin \ httpd.exe
Path to module error: I: \ wamp \ bin \ php \ php5.5.12 \ ext \ php_imap.dll
Report ID: d929ff23-2fab-11e6-bfd4-d43d7e6cc719
Full package name with error:
Relative application ID packet with error:
5)
Can not find the description of event ID 100 from source MySQL. The part that the event has started may not be installed on the local computer, or the installation is damaged. You can install or repair the component on the local computer.
If the event is coming from a different computer, the display information had to be stored at the event.
The following information is included in the event:
InnoDB: File \ ibdata1:. "Windows aio 'returned OS error 1210. Can not continuous operation
the message resource is present but the message can not be found in the string / message table
6)
Can not access file I: \ wamp \ bin \ php \ php5.5.12 \ ext \ php_imap.dll for one of the following reasons: There is a problem with the network, with the disk where the file is stored with the storage drivers on this computer, or the disk is missing. CLI program ended because of this error.
Program: CLI
File: I: \ wamp \ bin \ php \ php5.5.12 \ ext \ php_imap.dll
The error value is displayed in the section Additional information.
user Action
1. Open the file again. This may be a temporary problem that will resolve itself when the program is run.
2. If access to the file is still not possible and
- If the file is in the network, the network administrator must verify that there is no problem with the network and connect to the server can be made.
- If the file is on a removable disk such as a floppy disk or CD-ROM, you should check whether this disc is properly inserted into the drive.
3. Check and repair the file with CHKDSK. Click on Start, Run and type CMD. Click OK and type CHKDSK / F at the command prompt. then press ENTER.
4. If the problem persists, you must restore the file from a backup medium.
5. Determine whether other files can be opened on the same disk. If not, the disk is damaged. If it is a hard disk, contact your network administrator or hardware vendor for support.
Additional information
Error value: C00000B5
Type drive: 2
7)
Name of application with error: php win.exe, Version: 5.5.12.0, timestamp: 0x53613fd9
Name of module error: php_imap.dll, Version: 5.5.12.0, timestamp: 0x5361414c
Exception code: 0xc0000006
Margin of error: 0x000147a0
ID of process error: 0x1bfc
Start time of application with error: 0x01d1c3b70bc86bdc
Path to application with error: I: \ wamp \ bin \ php \ php5.5.12 \ php win.exe
Path to module error: I: \ wamp \ bin \ php \ php5.5.12 \ ext \ php_imap.dll
Report ID: d34a0851-2faa-11e6-bfd4-d43d7e6cc719
Full package name with error:
Relative application ID packet with error:
8)
Can not access file I: \ wamp \ bin \ php \ php5.5.12 \ ext \ php_intl.dll for one of the following reasons: There is a problem with the network, with the disk where the file is stored with the storage drivers on this computer, or the disk is missing. CLI program ended because of this error.
Program: CLI
File: I: \ wamp \ bin \ php \ php5.5.12 \ ext \ php_intl.dll
The error value is displayed in the section Additional information.
user Action
1. Open the file again. This may be a temporary problem that will resolve itself when the program is run.
2. If access to the file is still not possible and
- If the file is in the network, the network administrator must verify that there is no problem with the network and connect to the server can be made.
- If the file is on a removable disk such as a floppy disk or CD-ROM, you should check whether this disc is properly inserted into the drive.
3. Check and repair the file with CHKDSK. Click on Start, Run and type CMD. Click OK and type CHKDSK / F at the command prompt. then press ENTER.
4. If the problem persists, you must restore the file from a backup medium.
5. Determine whether other files can be opened on the same disk. If not, the disk is damaged. If it is a hard disk, contact your network administrator or hardware vendor for support.
Additional information
Error value: C00000B5
Type drive: 2
9)
Name of application with error: php win.exe, Version: 5.5.12.0, timestamp: 0x53613fd9
Name of module error: ntdll.dll, version 6.3.9600.18233, time stamp: 0x56bb4e1d
Exception code: 0xc0000006
Margin of error: 0x00057241
ID of process error: 0xc9c
Start time of application with error: 0x01d1c3b4173f350b
Path to application with error: I: \ wamp \ bin \ php \ php5.5.12 \ php win.exe
Path to module error: C: \ WINDOWS \ SYSTEM32 \ ntdll.dll
Report Id: 8176332b-2fa8-11e6-bfd3-d43d7e6cc719
Full package name with error:
Relative application ID packet with error:
Re: dozens of errors in application logs
Posted by:
RiggsFolly
(Moderator)
Date: June 11, 2016 11:56AM
Please answer these question so we know what version of everything you are using
Read before you ask a question
Here are Trouble shooting tips
And if you are using WAMPServer 3 Here are some more trouble shooting tips
---------------------------------------------------------------------------------------------
(Windows 10 Pro 64bit) (Wampserver 3.3.4 64bit) Aestan Tray Menu 3.2.5.4
<Apache versions MULTIPE> <PHP versions MULTIPLE> <MySQL Versions MULTIPLE>
<MariaDB versions MULTIPLE> <phpMyAdmin versions MULTIPLE> <MySQL Workbench 8.0.23>
Read The Manuals Apache -- MySQL -- PHP -- phpMyAdmin
Get your Apache/MySQL/mariaDB/PHP ADDONs here from the WAMPServer alternate Repo
-X-X-X- Backup your databases regularly Here is How dont regret it later! Yes even when developing -X-X-X-
Read before you ask a question
Here are Trouble shooting tips
And if you are using WAMPServer 3 Here are some more trouble shooting tips
---------------------------------------------------------------------------------------------
(Windows 10 Pro 64bit) (Wampserver 3.3.4 64bit) Aestan Tray Menu 3.2.5.4
<Apache versions MULTIPE> <PHP versions MULTIPLE> <MySQL Versions MULTIPLE>
<MariaDB versions MULTIPLE> <phpMyAdmin versions MULTIPLE> <MySQL Workbench 8.0.23>
Read The Manuals Apache -- MySQL -- PHP -- phpMyAdmin
Get your Apache/MySQL/mariaDB/PHP ADDONs here from the WAMPServer alternate Repo
-X-X-X- Backup your databases regularly Here is How dont regret it later! Yes even when developing -X-X-X-
Re: dozens of errors in application logs
Posted by:
LivingThis
(---.cm-6-1d.dynamic.ziggo.nl)
Date: June 11, 2016 12:43PM
RiggsFolly Wrote:
-------------------------------------------------------
> Please answer these question so we know what
> version of everything you are using
>
> [url=http://forum.wampserver.com/read.php?2,129067
> ]Read before you ask a question[/url]
>
> Here are
> [url=http://forum.wampserver.com/read.php?2,134915
> ]Trouble shooting tips[/url]
>
> And if you are using WAMPServer 3
> [url=http://forum.wampserver.com/read.php?2,138295
> ]Here are some more trouble shooting tips[/url]
I only followed the steps from, read before you ask a question:
this is my answer:
windows version? 8.1 / 64 bit
wamp version: 2.5 / 32 bit
Apache 2.4.9
Php 5.5.12
Mysql 5.6.17
1 - Windows version used (Specify version number AND whether 32 or 64 bit)
2 - Version WampServer (Specify version number AND whether 32 or 64 bit)
3 - Apache Version
4 - PHP Version
5 - MySQL Version
Apache access log and error log no changes since yesterday.
Php has errors from today:
[11-Jun-2016 08:04:39 UTC] PHP Warning: PHP Startup: Unable to load dynamic library '/wamp/bin/php/php5.5.12/ext/php_curl.dll' - Error during an operation in a page .
in Unknown on line 0
[11-Jun-2016 08:05:45 UTC] PHP Warning: PHP Startup: Unable to load dynamic library '/wamp/bin/php/php5.5.12/ext/php_intl.dll' - The specified module could not be found.
in Unknown on line 0
[11-Jun-2016 08:07:29 UTC] PHP Warning: PHP Startup: Unable to load dynamic library '/wamp/bin/php/php5.5.12/ext/php_ldap.dll' - Error during an operation in a page .
in Unknown on line 0
[11-Jun-2016 08:26:56 UTC] PHP Warning: PHP Startup: Unable to load dynamic library /wamp/bin/php/php5.5.12/ext/php_intl.dll '- Can not find specified module.
in Unknown on line 0
……………………………………………….
Windows Application logs with mysql/apache (not php but first post)
1)
Name of application with error: httpd.exe, version 2.4.9.0, time stamp: 0x532585f0
Name of module error: ntdll.dll, version 6.3.9600.18233, time stamp: 0x56bb4e1d
Exception code: 0xc0000006
Margin of error: 0x00057241
ID of process error: 0x1a84
Start time of application with error: 0x01d1c3b8d13c31f6
Path to application with error: I: \ wamp \ bin \ apache \ apache2.4.9 \ bin \ httpd.exe
Path to module error: C: \ WINDOWS \ SYSTEM32 \ ntdll.dll
Report ID: 501a41fb-2fac-11e6-bfd4-d43d7e6cc719
Full package name with error:
Relative application ID packet with error:
2)
Name of application with error: httpd.exe, version 2.4.9.0, time stamp: 0x532585f0
Name of module error: php_imap.dll, Version: 5.5.12.0, timestamp: 0x5361414c
Exception code: 0xc0000006
Margin of error: 0x000147a0
ID of process error: 0x18f4
Start time of application with error: 0x01d1c3b7965b295b
Path to application with error: I: \ wamp \ bin \ apache \ apache2.4.9 \ bin \ httpd.exe
Path to module error: I: \ wamp \ bin \ php \ php5.5.12 \ ext \ php_imap.dll
Report ID: d929ff23-2fab-11e6-bfd4-d43d7e6cc719
Full package name with error:
Relative application ID packet with error:
3)
Can not find the description of event ID 100 from source MySQL. The part that the event has started may not be installed on the local computer, or the installation is damaged. You can install or repair the component on the local computer.
If the event is coming from a different computer, the display information had to be stored at the event.
The following information is included in the event:
InnoDB: File \ ibdata1:. "Windows aio 'returned OS error 1210. Can not continuous operation
the message resource is present but the message can not be found in the string / message table
4)
Name of application with error: php win.exe, Version: 5.5.12.0, timestamp: 0x53613fd9
Name of module error: php_imap.dll, Version: 5.5.12.0, timestamp: 0x5361414c
Exception code: 0xc0000006
Margin of error: 0x000147a0
ID of process error: 0x1bfc
Start time of application with error: 0x01d1c3b70bc86bdc
Path to application with error: I: \ wamp \ bin \ php \ php5.5.12 \ php win.exe
Path to module error: I: \ wamp \ bin \ php \ php5.5.12 \ ext \ php_imap.dll
Report ID: d34a0851-2faa-11e6-bfd4-d43d7e6cc719
Full package name with error:
Relative application ID packet with error:
…………………….
My hosts file:
127.0.0.1 localhost
::1 localhost
# experiment SSL certificaten/ local domain
127.0.0.1 wamphelpers.dev www.wamphelpers.dev
::1 wamphelpers.dev www.wamphelpers.dev
# a 2nd virt host
127.0.0.1 localhost
...........................................................................
-------------------------------------------------------
> Please answer these question so we know what
> version of everything you are using
>
> [url=http://forum.wampserver.com/read.php?2,129067
> ]Read before you ask a question[/url]
>
> Here are
> [url=http://forum.wampserver.com/read.php?2,134915
> ]Trouble shooting tips[/url]
>
> And if you are using WAMPServer 3
> [url=http://forum.wampserver.com/read.php?2,138295
> ]Here are some more trouble shooting tips[/url]
I only followed the steps from, read before you ask a question:
this is my answer:
windows version? 8.1 / 64 bit
wamp version: 2.5 / 32 bit
Apache 2.4.9
Php 5.5.12
Mysql 5.6.17
1 - Windows version used (Specify version number AND whether 32 or 64 bit)
2 - Version WampServer (Specify version number AND whether 32 or 64 bit)
3 - Apache Version
4 - PHP Version
5 - MySQL Version
Apache access log and error log no changes since yesterday.
Php has errors from today:
[11-Jun-2016 08:04:39 UTC] PHP Warning: PHP Startup: Unable to load dynamic library '/wamp/bin/php/php5.5.12/ext/php_curl.dll' - Error during an operation in a page .
in Unknown on line 0
[11-Jun-2016 08:05:45 UTC] PHP Warning: PHP Startup: Unable to load dynamic library '/wamp/bin/php/php5.5.12/ext/php_intl.dll' - The specified module could not be found.
in Unknown on line 0
[11-Jun-2016 08:07:29 UTC] PHP Warning: PHP Startup: Unable to load dynamic library '/wamp/bin/php/php5.5.12/ext/php_ldap.dll' - Error during an operation in a page .
in Unknown on line 0
[11-Jun-2016 08:26:56 UTC] PHP Warning: PHP Startup: Unable to load dynamic library /wamp/bin/php/php5.5.12/ext/php_intl.dll '- Can not find specified module.
in Unknown on line 0
……………………………………………….
Windows Application logs with mysql/apache (not php but first post)
1)
Name of application with error: httpd.exe, version 2.4.9.0, time stamp: 0x532585f0
Name of module error: ntdll.dll, version 6.3.9600.18233, time stamp: 0x56bb4e1d
Exception code: 0xc0000006
Margin of error: 0x00057241
ID of process error: 0x1a84
Start time of application with error: 0x01d1c3b8d13c31f6
Path to application with error: I: \ wamp \ bin \ apache \ apache2.4.9 \ bin \ httpd.exe
Path to module error: C: \ WINDOWS \ SYSTEM32 \ ntdll.dll
Report ID: 501a41fb-2fac-11e6-bfd4-d43d7e6cc719
Full package name with error:
Relative application ID packet with error:
2)
Name of application with error: httpd.exe, version 2.4.9.0, time stamp: 0x532585f0
Name of module error: php_imap.dll, Version: 5.5.12.0, timestamp: 0x5361414c
Exception code: 0xc0000006
Margin of error: 0x000147a0
ID of process error: 0x18f4
Start time of application with error: 0x01d1c3b7965b295b
Path to application with error: I: \ wamp \ bin \ apache \ apache2.4.9 \ bin \ httpd.exe
Path to module error: I: \ wamp \ bin \ php \ php5.5.12 \ ext \ php_imap.dll
Report ID: d929ff23-2fab-11e6-bfd4-d43d7e6cc719
Full package name with error:
Relative application ID packet with error:
3)
Can not find the description of event ID 100 from source MySQL. The part that the event has started may not be installed on the local computer, or the installation is damaged. You can install or repair the component on the local computer.
If the event is coming from a different computer, the display information had to be stored at the event.
The following information is included in the event:
InnoDB: File \ ibdata1:. "Windows aio 'returned OS error 1210. Can not continuous operation
the message resource is present but the message can not be found in the string / message table
4)
Name of application with error: php win.exe, Version: 5.5.12.0, timestamp: 0x53613fd9
Name of module error: php_imap.dll, Version: 5.5.12.0, timestamp: 0x5361414c
Exception code: 0xc0000006
Margin of error: 0x000147a0
ID of process error: 0x1bfc
Start time of application with error: 0x01d1c3b70bc86bdc
Path to application with error: I: \ wamp \ bin \ php \ php5.5.12 \ php win.exe
Path to module error: I: \ wamp \ bin \ php \ php5.5.12 \ ext \ php_imap.dll
Report ID: d34a0851-2faa-11e6-bfd4-d43d7e6cc719
Full package name with error:
Relative application ID packet with error:
…………………….
My hosts file:
127.0.0.1 localhost
::1 localhost
# experiment SSL certificaten/ local domain
127.0.0.1 wamphelpers.dev www.wamphelpers.dev
::1 wamphelpers.dev www.wamphelpers.dev
# a 2nd virt host
127.0.0.1 localhost
...........................................................................
Re: dozens of errors in application logs
Posted by:
RiggsFolly
(Moderator)
Date: June 11, 2016 01:37PM
Fix
Using the wampmanager menus do
Right Click wampmanager -> Apache -> Version -> 2.4.9 ( Click on the 2.4.9 menu item)
Wait for Apache to be restarted.
The SYMLINKS will have been rebuilt correctly
---------------------------------------------------------------------------------------------
(Windows 10 Pro 64bit) (Wampserver 3.3.4 64bit) Aestan Tray Menu 3.2.5.4
<Apache versions MULTIPE> <PHP versions MULTIPLE> <MySQL Versions MULTIPLE>
<MariaDB versions MULTIPLE> <phpMyAdmin versions MULTIPLE> <MySQL Workbench 8.0.23>
Read The Manuals Apache -- MySQL -- PHP -- phpMyAdmin
Get your Apache/MySQL/mariaDB/PHP ADDONs here from the WAMPServer alternate Repo
-X-X-X- Backup your databases regularly Here is How dont regret it later! Yes even when developing -X-X-X-
Using the wampmanager menus do
Right Click wampmanager -> Apache -> Version -> 2.4.9 ( Click on the 2.4.9 menu item)
Wait for Apache to be restarted.
The SYMLINKS will have been rebuilt correctly
---------------------------------------------------------------------------------------------
(Windows 10 Pro 64bit) (Wampserver 3.3.4 64bit) Aestan Tray Menu 3.2.5.4
<Apache versions MULTIPE> <PHP versions MULTIPLE> <MySQL Versions MULTIPLE>
<MariaDB versions MULTIPLE> <phpMyAdmin versions MULTIPLE> <MySQL Workbench 8.0.23>
Read The Manuals Apache -- MySQL -- PHP -- phpMyAdmin
Get your Apache/MySQL/mariaDB/PHP ADDONs here from the WAMPServer alternate Repo
-X-X-X- Backup your databases regularly Here is How dont regret it later! Yes even when developing -X-X-X-
Re: dozens of errors in application logs
Posted by:
LivingThis
(---.cm-6-1d.dynamic.ziggo.nl)
Date: June 11, 2016 06:35PM
icon still orange
in the menu under apache/service i see the first three options written grey, unable to click them.
update:
also wiondows gave a pop-up error message.
Php win.exe
The specified I O operation at I: not completed by the expiration of the timeout period
Edited 1 time(s). Last edit at 06/11/2016 07:17PM by LivingThis.
in the menu under apache/service i see the first three options written grey, unable to click them.
update:
also wiondows gave a pop-up error message.
Php win.exe
The specified I O operation at I: not completed by the expiration of the timeout period
Edited 1 time(s). Last edit at 06/11/2016 07:17PM by LivingThis.
Re: dozens of errors in application logs
Posted by:
LivingThis
(---.cm-6-1d.dynamic.ziggo.nl)
Date: June 11, 2016 07:44PM
icon now green.
but i cant tell what I changed or clicked. as far as I remember nothing.
but i cant tell what I changed or clicked. as far as I remember nothing.
Re: dozens of errors in application logs
Posted by:
LivingThis
(---.cm-6-1d.dynamic.ziggo.nl)
Date: June 11, 2016 08:46PM
I cant start phpmyadmin.
clicking it gives the following error code:
Fatal error: Call to undefined function mb_detect_encoding() in I:\wamp\apps\phpmyadmin4.1.14\libraries\php-gettext\gettext.inc on line 177
other pages that use mysqli also give error messages.
Fatal error: Class 'mysqli' not found in I:\wamp\www\my_site\my_page.php on line 27
clicking it gives the following error code:
Fatal error: Call to undefined function mb_detect_encoding() in I:\wamp\apps\phpmyadmin4.1.14\libraries\php-gettext\gettext.inc on line 177
other pages that use mysqli also give error messages.
Fatal error: Class 'mysqli' not found in I:\wamp\www\my_site\my_page.php on line 27
Re: dozens of errors in application logs
Posted by:
LivingThis
(---.cm-6-1d.dynamic.ziggo.nl)
Date: June 12, 2016 08:44AM
WAMP icon is green, but very slow.
The wheel in the browser keeps on turning and i can only see the root directory no connection to other pages, the index.php.
Also, it took quite long before the icon turned green.
The wheel in the browser keeps on turning and i can only see the root directory no connection to other pages, the index.php.
Also, it took quite long before the icon turned green.
Re: dozens of errors in application logs
Posted by:
LivingThis
(---.cm-6-1d.dynamic.ziggo.nl)
Date: June 12, 2016 10:36AM
sorry for mentioning this
I changed the virtual host file and checked it with httpd -t with output Syntax OK.
icon now orange. (this process is now clearly faster)
mysql is running but apache not.
When I go to the menu and try to start by clicking Start/Resume Service then I get to following error message:
Aestran Menu
Could not execute menu service (internal error)
Ecepetion: could not perform service action /
I changed the virtual host file and checked it with httpd -t with output Syntax OK.
icon now orange. (this process is now clearly faster)
mysql is running but apache not.
When I go to the menu and try to start by clicking Start/Resume Service then I get to following error message:
Aestran Menu
Could not execute menu service (internal error)
Ecepetion: could not perform service action /
Re: dozens of errors in application logs
Posted by:
LivingThis
(---.cm-6-1d.dynamic.ziggo.nl)
Date: June 12, 2016 10:58AM
So in the menu I checked the port used it was Apache / php running at port 80
Re: dozens of errors in application logs
Posted by:
LivingThis
(---.cm-6-1d.dynamic.ziggo.nl)
Date: June 13, 2016 02:06PM
Icon still orange. mysql is running, but apache not.
I find two errors in the windows logs:
1)
Name of application with error: php win.exe, Version: 5.5.12.0, timestamp: 0x53613fd9
Name of module error: ntdll.dll, version 6.3.9600.18233, time stamp: 0x56bb4e1d
Exception code: 0xc0000006
Margin of error: 0x00057241
ID of process error: 0x1440
Start time of application with error: 0x01d1c54f000f6ef5
Path to application with error: I: \ wamp \ bin \ php \ php5.5.12 \ php win.exe
Path to module error: C: \ WINDOWS \ SYSTEM32 \ ntdll.dll
Report ID: 814e98a9-3142-11e6-bfdf-d43d7e6cc719
Full package name with error:
Relative application ID packet with error:
2)
Can not access file I: \ wamp \ bin \ php \ php5.5.12 \ ext \ php_intl.dll for one of the following reasons: There is a problem with the network, with the disk where the file is stored with the storage drivers on this computer, or the disk is missing. CLI program ended because of this error.
Program: CLI
File: I: \ wamp \ bin \ php \ php5.5.12 \ ext \ php_intl.dll
The error value is displayed in the section Additional information.
user Action
1. Open the file again. This may be a temporary problem that will resolve itself when the program is run.
2. If access to the file is still not possible and
- If the file is in the network, the network administrator must verify that there is no problem with the network and connect to the server can be made.
- If the file is on a removable disk such as a floppy disk or CD-ROM, you should check whether this disc is properly inserted into the drive.
3. Check and repair the file with CHKDSK. Click on Start, Run and type CMD. Click OK and type CHKDSK / F at the command prompt. then press ENTER.
4. If the problem persists, you must restore the file from a backup medium.
5. Determine whether other files can be opened on the same disk. If not, the disk is damaged. If it is a hard disk, contact your network administrator or hardware vendor for support.
Additional information
Error value: C00000B5
Type drive: 2
..............................................
I'm not that experienced in apache errors. Maybe they are caused by unchecked modules or extensions, but not sure which ones
I really hope you people here can help me out.
For me your help and patience means a lot.
I find two errors in the windows logs:
1)
Name of application with error: php win.exe, Version: 5.5.12.0, timestamp: 0x53613fd9
Name of module error: ntdll.dll, version 6.3.9600.18233, time stamp: 0x56bb4e1d
Exception code: 0xc0000006
Margin of error: 0x00057241
ID of process error: 0x1440
Start time of application with error: 0x01d1c54f000f6ef5
Path to application with error: I: \ wamp \ bin \ php \ php5.5.12 \ php win.exe
Path to module error: C: \ WINDOWS \ SYSTEM32 \ ntdll.dll
Report ID: 814e98a9-3142-11e6-bfdf-d43d7e6cc719
Full package name with error:
Relative application ID packet with error:
2)
Can not access file I: \ wamp \ bin \ php \ php5.5.12 \ ext \ php_intl.dll for one of the following reasons: There is a problem with the network, with the disk where the file is stored with the storage drivers on this computer, or the disk is missing. CLI program ended because of this error.
Program: CLI
File: I: \ wamp \ bin \ php \ php5.5.12 \ ext \ php_intl.dll
The error value is displayed in the section Additional information.
user Action
1. Open the file again. This may be a temporary problem that will resolve itself when the program is run.
2. If access to the file is still not possible and
- If the file is in the network, the network administrator must verify that there is no problem with the network and connect to the server can be made.
- If the file is on a removable disk such as a floppy disk or CD-ROM, you should check whether this disc is properly inserted into the drive.
3. Check and repair the file with CHKDSK. Click on Start, Run and type CMD. Click OK and type CHKDSK / F at the command prompt. then press ENTER.
4. If the problem persists, you must restore the file from a backup medium.
5. Determine whether other files can be opened on the same disk. If not, the disk is damaged. If it is a hard disk, contact your network administrator or hardware vendor for support.
Additional information
Error value: C00000B5
Type drive: 2
..............................................
I'm not that experienced in apache errors. Maybe they are caused by unchecked modules or extensions, but not sure which ones
I really hope you people here can help me out.
For me your help and patience means a lot.
Re: dozens of errors in application logs
Posted by:
Otomatic
(Moderator)
Date: June 13, 2016 03:06PM
Hi,
- Given all the changes you made early on, and despite all logic,
- Given all the errors you constantly have and it seems impossible to correct without creating other errors,
- Given that with all the messages you have written, full of error messages,
- Since I come to a point where I am completely lost in the thread of your messages,
I think the best solution is to start from scratch.
So :
- Backup your local sites if you have
- Export your database in SQL files if you have
- Uninstall Wampserver
- Delete the install folder
- Verify that the two services wampapache and wampmysqld (or wampapache64 and wampmysqld64 for 64 bit version) does not exist anymore
If service still exist suppress it by a command line : sc delete servicename
- 1 - Verify if all needed VC++ packages are correctly installed.
For that use the tool Checks VC++ packages installed
If the response is not "All VC++ packages needed to Wampserver seem to be installed correctly", you have to install needed packages you can foun here [wampserver.aviatechno.net] in the section Visual C++ Redistribuable Packages
- 2 - Verify that Skype does not use port 80
Point n°03 of TROUBLESHOOTING TIPS
- 3 - Verify that IIS is uninstalled
Point n°08 of TROUBLESHOOTING TIPS
- 4 - Install Wampserver 3.0.4 you can dowload here: [wampserver.aviatechno.net]
---------------------------------------------------------------
Documentation Apache - Documentation PHP - Documentation MySQL - Wampserver install files & addons
- Given all the changes you made early on, and despite all logic,
- Given all the errors you constantly have and it seems impossible to correct without creating other errors,
- Given that with all the messages you have written, full of error messages,
- Since I come to a point where I am completely lost in the thread of your messages,
I think the best solution is to start from scratch.
So :
- Backup your local sites if you have
- Export your database in SQL files if you have
- Uninstall Wampserver
- Delete the install folder
- Verify that the two services wampapache and wampmysqld (or wampapache64 and wampmysqld64 for 64 bit version) does not exist anymore
If service still exist suppress it by a command line : sc delete servicename
- 1 - Verify if all needed VC++ packages are correctly installed.
For that use the tool Checks VC++ packages installed
If the response is not "All VC++ packages needed to Wampserver seem to be installed correctly", you have to install needed packages you can foun here [wampserver.aviatechno.net] in the section Visual C++ Redistribuable Packages
- 2 - Verify that Skype does not use port 80
Point n°03 of TROUBLESHOOTING TIPS
- 3 - Verify that IIS is uninstalled
Point n°08 of TROUBLESHOOTING TIPS
- 4 - Install Wampserver 3.0.4 you can dowload here: [wampserver.aviatechno.net]
---------------------------------------------------------------
Documentation Apache - Documentation PHP - Documentation MySQL - Wampserver install files & addons
Re: dozens of errors in application logs
Posted by:
SimonT
(---.lightspeed.stlsmo.sbcglobal.net)
Date: June 15, 2016 12:39AM
I totally agree with Otomatic, you need to start over with a clean slate.
Re: dozens of errors in application logs
Posted by:
LivingThis
(---.cm-6-1d.dynamic.ziggo.nl)
Date: June 15, 2016 05:55PM
yeah well I have to follow the recommendations from here.
Personally it is very frustrating because due to hacking I have to reinstall again.
I know it is a bit off topic on this forum, but hacking and malware is a big issue.
My experience after a year of programming and lurking at php sites is that it seems that you get more easily infected by a virus.
Maybe their servers are more proned to be under attack, maybe some people are causing these problems aware.
Normal anti-virus doesnt work enough. I'm thinking about installing a special recovery card so that you have a clean start up every time you reboot.
I recently installed a mailserver called ToolHeap and since then the problems started I found an alternative but still its slowing down things and causes a lot of extra work. But I'm not sure wheter it is this ToolHeap software it could also be something else.
What kind of arrangements do you take to secure your wamp installation?
Personally it is very frustrating because due to hacking I have to reinstall again.
I know it is a bit off topic on this forum, but hacking and malware is a big issue.
My experience after a year of programming and lurking at php sites is that it seems that you get more easily infected by a virus.
Maybe their servers are more proned to be under attack, maybe some people are causing these problems aware.
Normal anti-virus doesnt work enough. I'm thinking about installing a special recovery card so that you have a clean start up every time you reboot.
I recently installed a mailserver called ToolHeap and since then the problems started I found an alternative but still its slowing down things and causes a lot of extra work. But I'm not sure wheter it is this ToolHeap software it could also be something else.
What kind of arrangements do you take to secure your wamp installation?
Re: dozens of errors in application logs
Posted by:
Otomatic
(Moderator)
Date: June 15, 2016 06:47PM
Hi,
> What kind of arrangements do you take to secure your wamp installation?
I often say the same things, but Wampserver is designed to be a local development server.
Open a server to the outside world should be performed by specialists aware of security issues and blocking access.
This is why with Wampserver 3, Option Online / Offline is no longer accessible directly. This is to prevent neophytes open their server (and at the same time their PC) to the world, with a single click.
I'm not a specialist in Internet security, but some basic rules apply.
- We do not touch the prohibitions in httpd.conf
- The VirtualHost must imperatively be used.
- The VirtualHost localhost should always be "Require local".
- Only the VirtualHost can be accessed from outside can have a "Require all Granted"
- On an intranet must be limited permissions to network IP range.
- A password must be assigned to root MySQL.
- VirtualHost for authorized external access, site configuration files must be in a folder with a .htaccess file with Require all denied
- ihe scripts to perform tests must also be in a folder with a .htaccess file with "Local Require" and whether those test files should be used in a hosting it allows access to your IP by
<RequireAny>
Require local
Require my_ip
</RequireAny>
They are easy rules to implement.
On my router, the port forwarding rules are activated only when I have to perform tests from the outside.
- network administrator is a profession.
- CIO is a job.
- hosting claim skills.
This is not because Wampserver makes it all that anyone can do it without risk.
And finally, I recall that the best anti-virus, anti-malware, anti-hacking, anti-phishing, is the interface between the chair and the keyboard.
---------------------------------------------------------------
Documentation Apache - Documentation PHP - Documentation MySQL - Wampserver install files & addons
> What kind of arrangements do you take to secure your wamp installation?
I often say the same things, but Wampserver is designed to be a local development server.
Open a server to the outside world should be performed by specialists aware of security issues and blocking access.
This is why with Wampserver 3, Option Online / Offline is no longer accessible directly. This is to prevent neophytes open their server (and at the same time their PC) to the world, with a single click.
I'm not a specialist in Internet security, but some basic rules apply.
- We do not touch the prohibitions in httpd.conf
- The VirtualHost must imperatively be used.
- The VirtualHost localhost should always be "Require local".
- Only the VirtualHost can be accessed from outside can have a "Require all Granted"
- On an intranet must be limited permissions to network IP range.
- A password must be assigned to root MySQL.
- VirtualHost for authorized external access, site configuration files must be in a folder with a .htaccess file with Require all denied
- ihe scripts to perform tests must also be in a folder with a .htaccess file with "Local Require" and whether those test files should be used in a hosting it allows access to your IP by
<RequireAny>
Require local
Require my_ip
</RequireAny>
They are easy rules to implement.
On my router, the port forwarding rules are activated only when I have to perform tests from the outside.
- network administrator is a profession.
- CIO is a job.
- hosting claim skills.
This is not because Wampserver makes it all that anyone can do it without risk.
And finally, I recall that the best anti-virus, anti-malware, anti-hacking, anti-phishing, is the interface between the chair and the keyboard.
---------------------------------------------------------------
Documentation Apache - Documentation PHP - Documentation MySQL - Wampserver install files & addons
Re: dozens of errors in application logs
Posted by:
LivingThis
(---.cm-6-1d.dynamic.ziggo.nl)
Date: June 16, 2016 09:58AM
I reinstalled WAMP, the 32bit version which is recommended instead of the experimental 64bit version, although I have a 64bit machine.
> - 1 - Verify if all needed VC++ packages are
> correctly installed.
> For that use the tool
> [url=http://wampserver.aviatechno.net/files/tools/
> check_vcredist.exe]Checks VC++ packages
> installed[/url]
> If the response is not "All VC++ packages needed
> to Wampserver seem to be installed correctly", you
> have to install needed packages you can foun here
> [url]http://wampserver.aviatechno.net/[/url] in the section
> Visual C++ Redistribuable Packages
I used the check_vcredist.exe to check which packages are needed, but I couldnt execute one which is needed.
filename: Vcredit_2008_sp1_atl_x64.exe
error message: error opening installation log file.
I downloaded from both the microsoft site as well as from the repository site here.
> - 1 - Verify if all needed VC++ packages are
> correctly installed.
> For that use the tool
> [url=http://wampserver.aviatechno.net/files/tools/
> check_vcredist.exe]Checks VC++ packages
> installed[/url]
> If the response is not "All VC++ packages needed
> to Wampserver seem to be installed correctly", you
> have to install needed packages you can foun here
> [url]http://wampserver.aviatechno.net/[/url] in the section
> Visual C++ Redistribuable Packages
I used the check_vcredist.exe to check which packages are needed, but I couldnt execute one which is needed.
filename: Vcredit_2008_sp1_atl_x64.exe
error message: error opening installation log file.
I downloaded from both the microsoft site as well as from the repository site here.
Re: dozens of errors in application logs
Posted by:
Otomatic
(Moderator)
Date: June 16, 2016 10:40AM
Hi,
> reinstalled WAMP, the 32bit version which is recommended instead of the experimental 64bit version
It was experimental before PHP 7.0.0 was released.
The true support of 64 bit is only done with PHP 7.0.x with Windows 64 bit.
> error message: error opening installation log file.
Can you post here the content of the test result of check_vcredist.exe that I look if there was not an alternative.
Having only one installation of Windows 7 and Windows 10 and 64 bit only, it is difficult for me to test all possibilities of not installing VC packages.
VC 2008 is VC9 and I think you can continue to install WampServer.
---------------------------------------------------------------
Documentation Apache - Documentation PHP - Documentation MySQL - Wampserver install files & addons
> reinstalled WAMP, the 32bit version which is recommended instead of the experimental 64bit version
It was experimental before PHP 7.0.0 was released.
The true support of 64 bit is only done with PHP 7.0.x with Windows 64 bit.
> error message: error opening installation log file.
Can you post here the content of the test result of check_vcredist.exe that I look if there was not an alternative.
Having only one installation of Windows 7 and Windows 10 and 64 bit only, it is difficult for me to test all possibilities of not installing VC packages.
VC 2008 is VC9 and I think you can continue to install WampServer.
---------------------------------------------------------------
Documentation Apache - Documentation PHP - Documentation MySQL - Wampserver install files & addons
Re: dozens of errors in application logs
Posted by:
LivingThis
(---.cm-6-1d.dynamic.ziggo.nl)
Date: June 16, 2016 12:32PM
Ok. I have wamp icon green, but there are still some problems.
the start up index page gives an error message
*** ERROR *** The PHP configuration loaded file is: - should be: H:/wamp/bin/apache/apache2.4.18/bin/php.ini or h:/wamp/bin/php/php5.6.19/phpforapache.ini
Clicking to php myadmin gives an error message like this:
phpMyAdmin - Error / The mbstring extension is missing. Please check your PHP configuration.
Then accessing some pages containing mysqli/databse php code give:
Fatal error: Class 'mysqli' not found in H:\wamp\www\mypage.php
..................................................
Another error I'm having is that I have not been able to open the menu since this install
Edited 1 time(s). Last edit at 06/16/2016 02:02PM by LivingThis.
the start up index page gives an error message
*** ERROR *** The PHP configuration loaded file is: - should be: H:/wamp/bin/apache/apache2.4.18/bin/php.ini or h:/wamp/bin/php/php5.6.19/phpforapache.ini
Clicking to php myadmin gives an error message like this:
phpMyAdmin - Error / The mbstring extension is missing. Please check your PHP configuration.
Then accessing some pages containing mysqli/databse php code give:
Fatal error: Class 'mysqli' not found in H:\wamp\www\mypage.php
..................................................
Another error I'm having is that I have not been able to open the menu since this install
Edited 1 time(s). Last edit at 06/16/2016 02:02PM by LivingThis.
Re: dozens of errors in application logs
Posted by:
LivingThis
(---.cm-6-1d.dynamic.ziggo.nl)
Date: June 16, 2016 02:40PM
the content of the test result of check_vcredist.exe:
VC_2008_SP1_ATL_SEC_UPD_REDIST_X64 ID={4B6C7001-C7D6-3710-913E-5BC23FCE91E6}
Visual C++ 2008 SP1 ATL Security Update Redistributable Package (x64)
**** NOT INSTALLED ****
see: [www.microsoft.com]
----------------------------------------
VC_2008_SP1_ATL_SEC_UPD_REDIST_X64 ID={4B6C7001-C7D6-3710-913E-5BC23FCE91E6}
Visual C++ 2008 SP1 ATL Security Update Redistributable Package (x64)
**** NOT INSTALLED ****
see: [www.microsoft.com]
----------------------------------------
Re: dozens of errors in application logs
Posted by:
Otomatic
(Moderator)
Date: June 16, 2016 02:58PM
Hi,
- Wampserver 3.0.4
Right-Click Wampmanager tray icon -> Refresh
- Wampserver 3.0.0 to 3.0.3
Wampmanager tray icon -> Apache -> Version -> 2.4.18 (Click on 2.4.18)
Wampmanager tray icon -> PHP -> version -> 5.6.19 (Click on 5.6.19)
---------------------------------------------------------------
Documentation Apache - Documentation PHP - Documentation MySQL - Wampserver install files & addons
Quote
*** ERROR *** The PHP configuration loaded file is: - should be: H:/wamp/bin/apache/apache2.4.18/bin/php.ini or h:/wamp/bin/php/php5.6.19/phpforapache.ini
- Wampserver 3.0.4
Right-Click Wampmanager tray icon -> Refresh
- Wampserver 3.0.0 to 3.0.3
Wampmanager tray icon -> Apache -> Version -> 2.4.18 (Click on 2.4.18)
Wampmanager tray icon -> PHP -> version -> 5.6.19 (Click on 5.6.19)
---------------------------------------------------------------
Documentation Apache - Documentation PHP - Documentation MySQL - Wampserver install files & addons
Sorry, only registered users may post in this forum.
