WampServer
Apache, PHP, MySQL
on Windows
Wamp > Apache > does not work
Posted by:
Kiro
(---.access.telenet.be)
Date: November 07, 2014 12:23PM
I have the wampserver installed in order to install and run Wordpress. The first couple of days everything was fine, but all of a sudden the Wamp icon turned orange and remained that way. Now, I have searched days and hours in order to find a solution and read multiple sites and topics, to no avail.
I have no ISS or Skype etc. running, and the web service thingy is unchecked, as is discussed on many websites. etc. etc.
When I check port 80 for Apache, I get the message that port 80 is nót actually being used.
I also changed the port from 80 tot 80 in another attempt, but this resulted in the fact that I could not reach my Wordpress site anymore.
I also followed these instructions, found on [forum.wampserver.com]:
----
"Step 1:
If you are getting the "your port 80 not actually used" in Windows 8
when you test port 80 from wamp icontray > apache > services > test port 80
open httpd.conf from wamp icontray > apache >httpd.conf and locate the line
#Listen 12.34.56.78:80
Listen 80
Make sure the line Listen 80 is uncommented and is as it is above and if you had changed to Listen 0:0:0:0:80 change it back to
Listen 80
Step 2:
Got to the hosts file C:/windows/system32/Drivers/etc and make sure it only contains 127.0.0.1 localhost and not ::1 ie make sure its shows #::1 if the ::1 is present
#::1
127.0.0.1 localhost
If you get an error "403 Access forbidden" when you try to access phpmyadmin go to step 3
Step 3: smiling smiley (Step courtesy Peter mortensen comment posted in stackoverflow.com link stackoverflow.com/questions/8366976/wamp-error-forbidden-you-dont-have-permission-to-access-phpmyadmin-on-this-s)
Change the content of c:/wamp/apps/alias/phpmyadmin.conf to the following
<directory "c:/wamp/apps/phpmyadmin3.4.5/">
Options Indexes FollowSymLinks MultiViews
AllowOverride all
Order Deny,Allow
Allow from all
</Directory>
NB: The phpmyadmin remains the version you have installed mine was c:/wamp/apps/phpmyadmin3.4.5/
The main thing here is to remove Deny from All and Allow from 127.0.0.1
Then restart Apache server after this and you are good to go."
----
The PHP error log has the following text:
[01-Nov-2014 22:58:50 UTC] PHP Warning: PHP Startup: Unable to load dynamic library 'c:/wamp/bin/php/php5.5.12/ext/php_intl.dll' - Kan opgegeven module niet vinden.
in Unknown on line 0
[01-Nov-2014 22:58:50 UTC] PHP Warning: PHP Startup: Unable to load dynamic library 'c:/wamp/bin/php/php5.5.12/ext/php_ldap.dll' - Kan opgegeven module niet vinden.
in Unknown on line 0
[01-Nov-2014 22:58:50 UTC] PHP Warning: PHP Startup: Unable to load dynamic library 'c:/wamp/bin/php/php5.5.12/ext/php_intl.dll' - Kan opgegeven module niet vinden.
in Unknown on line 0
[01-Nov-2014 22:58:50 UTC] PHP Warning: PHP Startup: Unable to load dynamic library 'c:/wamp/bin/php/php5.5.12/ext/php_ldap.dll' - Kan opgegeven module niet vinden.
in Unknown on line 0
[02-Nov-2014 00:27:20 Europe/Paris] PHP Warning: POST Content-Length of 39570586 bytes exceeds the limit of 3145728 bytes in Unknown on line 0
[02-Nov-2014 00:27:40 Europe/Paris] PHP Warning: POST Content-Length of 39570593 bytes exceeds the limit of 3145728 bytes in Unknown on line 0
[02-Nov-2014 00:51:47 Europe/Paris] PHP Warning: POST Content-Length of 21140420 bytes exceeds the limit of 3145728 bytes in Unknown on line 0
[06-Nov-2014 16:08:19 UTC] PHP Warning: PHP Startup: Unable to load dynamic library 'c:/wamp/bin/php/php5.5.12/ext/php_intl.dll' - Kan opgegeven module niet vinden.
in Unknown on line 0
[06-Nov-2014 16:08:19 UTC] PHP Warning: PHP Startup: Unable to load dynamic library 'c:/wamp/bin/php/php5.5.12/ext/php_ldap.dll' - Kan opgegeven module niet vinden.
in Unknown on line 0
[06-Nov-2014 16:08:20 UTC] PHP Warning: PHP Startup: Unable to load dynamic library 'c:/wamp/bin/php/php5.5.12/ext/php_intl.dll' - Kan opgegeven module niet vinden.
in Unknown on line 0
[06-Nov-2014 16:08:20 UTC] PHP Warning: PHP Startup: Unable to load dynamic library 'c:/wamp/bin/php/php5.5.12/ext/php_ldap.dll' - Kan opgegeven module niet vinden.
in Unknown on line 0
[06-Nov-2014 18:27:23 UTC] PHP Warning: PHP Startup: Unable to load dynamic library 'c:/wamp/bin/php/php5.5.12/ext/php_intl.dll' - Kan opgegeven module niet vinden.
in Unknown on line 0
[06-Nov-2014 18:27:23 UTC] PHP Warning: PHP Startup: Unable to load dynamic library 'c:/wamp/bin/php/php5.5.12/ext/php_ldap.dll' - Kan opgegeven module niet vinden.
in Unknown on line 0
[06-Nov-2014 18:27:24 UTC] PHP Warning: PHP Startup: Unable to load dynamic library 'c:/wamp/bin/php/php5.5.12/ext/php_intl.dll' - Kan opgegeven module niet vinden.
in Unknown on line 0
[06-Nov-2014 18:27:24 UTC] PHP Warning: PHP Startup: Unable to load dynamic library 'c:/wamp/bin/php/php5.5.12/ext/php_ldap.dll' - Kan opgegeven module niet vinden.
in Unknown on line 0
[06-Nov-2014 18:27:32 UTC] PHP Warning: PHP Startup: Unable to load dynamic library 'c:/wamp/bin/php/php5.5.12/ext/php_intl.dll' - Kan opgegeven module niet vinden.
in Unknown on line 0
[06-Nov-2014 18:27:32 UTC] PHP Warning: PHP Startup: Unable to load dynamic library 'c:/wamp/bin/php/php5.5.12/ext/php_ldap.dll' - Kan opgegeven module niet vinden.
in Unknown on line 0
[06-Nov-2014 18:27:33 UTC] PHP Warning: PHP Startup: Unable to load dynamic library 'c:/wamp/bin/php/php5.5.12/ext/php_intl.dll' - Kan opgegeven module niet vinden.
in Unknown on line 0
[06-Nov-2014 18:27:33 UTC] PHP Warning: PHP Startup: Unable to load dynamic library 'c:/wamp/bin/php/php5.5.12/ext/php_ldap.dll' - Kan opgegeven module niet vinden.
in Unknown on line 0
[06-Nov-2014 18:27:40 UTC] PHP Warning: PHP Startup: Unable to load dynamic library 'c:/wamp/bin/php/php5.5.12/ext/php_intl.dll' - Kan opgegeven module niet vinden.
in Unknown on line 0
[06-Nov-2014 18:27:40 UTC] PHP Warning: PHP Startup: Unable to load dynamic library 'c:/wamp/bin/php/php5.5.12/ext/php_ldap.dll' - Kan opgegeven module niet vinden.
in Unknown on line 0
[06-Nov-2014 18:27:41 UTC] PHP Warning: PHP Startup: Unable to load dynamic library 'c:/wamp/bin/php/php5.5.12/ext/php_intl.dll' - Kan opgegeven module niet vinden.
in Unknown on line 0
[06-Nov-2014 18:27:41 UTC] PHP Warning: PHP Startup: Unable to load dynamic library 'c:/wamp/bin/php/php5.5.12/ext/php_ldap.dll' - Kan opgegeven module niet vinden.
in Unknown on line 0
"Kan opgegeven module niet vinden" means the concerning item cannot be found.
----
The Apache Error Log has the following:
[Sat Nov 01 23:58:50.376969 2014] [mpm_winnt:notice] [pid 3264:tid 544] AH00455: Apache/2.4.9 (Win32) PHP/5.5.12 configured -- resuming normal operations
[Sat Nov 01 23:58:50.376969 2014] [mpm_winnt:notice] [pid 3264:tid 544] AH00456: Apache Lounge VC11 Server built: Mar 16 2014 12:13:13
[Sat Nov 01 23:58:50.376969 2014] [core:notice] [pid 3264:tid 544] AH00094: Command line: 'c:\\wamp\\bin\\apache\\apache2.4.9\\bin\\httpd.exe -d C:/wamp/bin/apache/apache2.4.9'
[Sat Nov 01 23:58:50.378971 2014] [mpm_winnt:notice] [pid 3264:tid 544] AH00418: Parent: Created child process 5800
[Sat Nov 01 23:58:50.776626 2014] [mpm_winnt:notice] [pid 5800:tid 480] AH00354: Child: Starting 64 worker threads.
[Sun Nov 02 00:01:55.679799 2014] [authz_core:error] [pid 5800:tid 964] [client ::1:49523] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Sun Nov 02 00:01:55.679799 2014] [authz_core:error] [pid 5800:tid 972] [client ::1:49525] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Sun Nov 02 00:01:55.679799 2014] [authz_core:error] [pid 5800:tid 952] [client ::1:49524] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Sun Nov 02 18:46:14.844754 2014] [authz_core:error] [pid 5800:tid 976] [client ::1:60873] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Sun Nov 02 18:46:14.844754 2014] [authz_core:error] [pid 5800:tid 952] [client ::1:60874] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Sun Nov 02 18:46:14.844754 2014] [authz_core:error] [pid 5800:tid 964] [client ::1:60875] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Sun Nov 02 18:52:51.119237 2014] [authz_core:error] [pid 5800:tid 952] [client ::1:60940] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Sun Nov 02 18:52:51.119237 2014] [authz_core:error] [pid 5800:tid 948] [client ::1:60941] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Sun Nov 02 18:52:51.119237 2014] [authz_core:error] [pid 5800:tid 964] [client ::1:60942] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Sun Nov 02 19:00:51.056643 2014] [authz_core:error] [pid 5800:tid 976] [client ::1:61066] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Sun Nov 02 19:00:51.056643 2014] [authz_core:error] [pid 5800:tid 964] [client ::1:61067] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Sun Nov 02 19:00:51.056643 2014] [authz_core:error] [pid 5800:tid 952] [client ::1:61068] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Sun Nov 02 19:01:50.556968 2014] [authz_core:error] [pid 5800:tid 948] [client ::1:61078] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Sun Nov 02 19:01:50.556968 2014] [authz_core:error] [pid 5800:tid 972] [client ::1:61080] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Sun Nov 02 19:01:50.556968 2014] [authz_core:error] [pid 5800:tid 984] [client ::1:61079] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Sun Nov 02 19:05:16.570515 2014] [authz_core:error] [pid 5800:tid 948] [client ::1:61085] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Sun Nov 02 19:05:16.570515 2014] [authz_core:error] [pid 5800:tid 976] [client ::1:61086] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Sun Nov 02 19:05:16.570515 2014] [authz_core:error] [pid 5800:tid 964] [client ::1:61087] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Sun Nov 02 19:21:56.145831 2014] [authz_core:error] [pid 5800:tid 952] [client ::1:61180] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Sun Nov 02 19:21:56.145831 2014] [authz_core:error] [pid 5800:tid 976] [client ::1:61181] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Sun Nov 02 19:21:56.145831 2014] [authz_core:error] [pid 5800:tid 972] [client ::1:61182] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Sun Nov 02 21:37:40.707463 2014] [authz_core:error] [pid 5800:tid 972] [client ::1:62473] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Sun Nov 02 21:37:40.707463 2014] [authz_core:error] [pid 5800:tid 984] [client ::1:62474] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Sun Nov 02 21:37:40.707463 2014] [authz_core:error] [pid 5800:tid 964] [client ::1:62475] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Sun Nov 02 21:57:54.502370 2014] [authz_core:error] [pid 5800:tid 976] [client ::1:62975] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Sun Nov 02 21:57:54.502370 2014] [authz_core:error] [pid 5800:tid 972] [client ::1:62976] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Sun Nov 02 21:57:54.502370 2014] [authz_core:error] [pid 5800:tid 984] [client ::1:62977] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Tue Nov 04 08:19:30.088388 2014] [authz_core:error] [pid 5800:tid 948] [client ::1:57395] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Tue Nov 04 08:19:30.088388 2014] [authz_core:error] [pid 5800:tid 952] [client ::1:57396] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Tue Nov 04 08:19:30.088388 2014] [authz_core:error] [pid 5800:tid 964] [client ::1:57397] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Thu Nov 06 17:08:18.987481 2014] [core:warn] [pid 5200:tid 428] AH00098: pid file C:/wamp/bin/apache/apache2.4.9/logs/httpd.pid overwritten -- Unclean shutdown of previous Apache run?
[Thu Nov 06 17:08:19.789035 2014] [mpm_winnt:notice] [pid 5200:tid 428] AH00455: Apache/2.4.9 (Win32) PHP/5.5.12 configured -- resuming normal operations
[Thu Nov 06 17:08:19.790035 2014] [mpm_winnt:notice] [pid 5200:tid 428] AH00456: Apache Lounge VC11 Server built: Mar 16 2014 12:13:13
[Thu Nov 06 17:08:19.790035 2014] [core:notice] [pid 5200:tid 428] AH00094: Command line: 'c:\\wamp\\bin\\apache\\apache2.4.9\\bin\\httpd.exe -d C:/wamp/bin/apache/apache2.4.9'
[Thu Nov 06 17:08:19.852081 2014] [mpm_winnt:notice] [pid 5200:tid 428] AH00418: Parent: Created child process 8064
[Thu Nov 06 17:08:20.475538 2014] [mpm_winnt:notice] [pid 8064:tid 472] AH00354: Child: Starting 64 worker threads.
[Thu Nov 06 19:27:20.486490 2014] [mpm_winnt:notice] [pid 5200:tid 428] AH00422: Parent: Received shutdown signal -- Shutting down the server.
[Thu Nov 06 19:27:22.488228 2014] [mpm_winnt:notice] [pid 8064:tid 472] AH00364: Child: All worker threads have exited.
[Thu Nov 06 19:27:22.537250 2014] [mpm_winnt:notice] [pid 5200:tid 428] AH00430: Parent: Child process 8064 exited successfully.
[Thu Nov 06 19:27:23.571690 2014] [mpm_winnt:notice] [pid 916:tid 544] AH00455: Apache/2.4.9 (Win32) PHP/5.5.12 configured -- resuming normal operations
[Thu Nov 06 19:27:23.571690 2014] [mpm_winnt:notice] [pid 916:tid 544] AH00456: Apache Lounge VC11 Server built: Mar 16 2014 12:13:13
[Thu Nov 06 19:27:23.571690 2014] [core:notice] [pid 916:tid 544] AH00094: Command line: 'c:\\wamp\\bin\\apache\\apache2.4.9\\bin\\httpd.exe -d C:/wamp/bin/apache/apache2.4.9'
[Thu Nov 06 19:27:23.575705 2014] [mpm_winnt:notice] [pid 916:tid 544] AH00418: Parent: Created child process 6712
[Thu Nov 06 19:27:24.103029 2014] [mpm_winnt:notice] [pid 6712:tid 464] AH00354: Child: Starting 64 worker threads.
[Thu Nov 06 19:27:30.135602 2014] [mpm_winnt:notice] [pid 916:tid 544] AH00422: Parent: Received shutdown signal -- Shutting down the server.
[Thu Nov 06 19:27:32.138030 2014] [mpm_winnt:notice] [pid 6712:tid 464] AH00364: Child: All worker threads have exited.
[Thu Nov 06 19:27:32.154029 2014] [mpm_winnt:notice] [pid 916:tid 544] AH00430: Parent: Child process 6712 exited successfully.
[Thu Nov 06 19:27:32.672323 2014] [mpm_winnt:notice] [pid 5472:tid 560] AH00455: Apache/2.4.9 (Win32) PHP/5.5.12 configured -- resuming normal operations
[Thu Nov 06 19:27:32.672323 2014] [mpm_winnt:notice] [pid 5472:tid 560] AH00456: Apache Lounge VC11 Server built: Mar 16 2014 12:13:13
[Thu Nov 06 19:27:32.672323 2014] [core:notice] [pid 5472:tid 560] AH00094: Command line: 'c:\\wamp\\bin\\apache\\apache2.4.9\\bin\\httpd.exe -d C:/wamp/bin/apache/apache2.4.9'
[Thu Nov 06 19:27:32.675325 2014] [mpm_winnt:notice] [pid 5472:tid 560] AH00418: Parent: Created child process 3540
[Thu Nov 06 19:27:33.188795 2014] [mpm_winnt:notice] [pid 3540:tid 336] AH00354: Child: Starting 64 worker threads.
[Thu Nov 06 19:27:37.268136 2014] [mpm_winnt:notice] [pid 5472:tid 560] AH00422: Parent: Received shutdown signal -- Shutting down the server.
[Thu Nov 06 19:27:39.270545 2014] [mpm_winnt:notice] [pid 3540:tid 336] AH00364: Child: All worker threads have exited.
[Thu Nov 06 19:27:39.287548 2014] [mpm_winnt:notice] [pid 5472:tid 560] AH00430: Parent: Child process 3540 exited successfully.
[Thu Nov 06 19:27:40.928716 2014] [mpm_winnt:notice] [pid 5216:tid 548] AH00455: Apache/2.4.9 (Win32) PHP/5.5.12 configured -- resuming normal operations
[Thu Nov 06 19:27:40.928716 2014] [mpm_winnt:notice] [pid 5216:tid 548] AH00456: Apache Lounge VC11 Server built: Mar 16 2014 12:13:13
[Thu Nov 06 19:27:40.928716 2014] [core:notice] [pid 5216:tid 548] AH00094: Command line: 'c:\\wamp\\bin\\apache\\apache2.4.9\\bin\\httpd.exe -d C:/wamp/bin/apache/apache2.4.9'
[Thu Nov 06 19:27:40.931718 2014] [mpm_winnt:notice] [pid 5216:tid 548] AH00418: Parent: Created child process 4528
[Thu Nov 06 19:27:41.446069 2014] [mpm_winnt:notice] [pid 4528:tid 464] AH00354: Child: Starting 64 worker threads.
[Thu Nov 06 19:48:14.894902 2014] [mpm_winnt:notice] [pid 5216:tid 548] AH00422: Parent: Received shutdown signal -- Shutting down the server.
[Thu Nov 06 19:48:16.896147 2014] [mpm_winnt:notice] [pid 4528:tid 464] AH00364: Child: All worker threads have exited.
[Thu Nov 06 19:48:16.922154 2014] [mpm_winnt:notice] [pid 5216:tid 548] AH00430: Parent: Child process 4528 exited successfully.
----
Unfortunately, I do not know what to make of these logs, probably due to the fact that I have little knowledge about these things and computers in general.
I have no clue what it can be and am about to give up. Hopefully someone here has ideas to solve the problem.
----
This is the phpmyadmin.config file:
Alias /phpmyadmin "c:/wamp/apps/phpmyadmin4.1.14/"
# to give access to phpmyadmin from outside
# replace the lines
#
# Require local
#
# by
#
# Require all granted
#
<Directory "c:/wamp/apps/phpmyadmin4.1.14/">
Options Indexes FollowSymLinks MultiViews
AllowOverride all
<IfDefine APACHE24>
Require local
</IfDefine>
<IfDefine !APACHE24>
Order Deny,Allow
Deny from all Allow from localhost ::1 127.0.0.1 </IfDefine>
php_admin_value upload_max_filesize 128M
php_admin_value post_max_size 128M
php_admin_value max_execution_time 360
php_admin_value max_input_time 360
</Directory>
----
This is the httpd.conf file:
#
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:[httpd.apache.org]; for detailed information.
# In particular, see
# <URL:[httpd.apache.org];
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
# will be interpreted as '/logs/access_log'.
#
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache"
.
# If a drive letter is omitted, the drive on which httpd.exe is located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths to avoid confusion.
ServerSignature On
ServerTokens Full
#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used. If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
#
ServerRoot "c:/wamp/bin/apache/apache2.4.9"
Define APACHE24 Apache2.4
#
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
#
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
#
# Mutex default:logs
#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:808Listen 80Listen [::0]:80
#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule allowmethods_module modules/mod_allowmethods.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_core_module modules/mod_authn_core.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_socache_module modules/mod_authn_socache.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule authz_core_module modules/mod_authz_core.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule buffer_module modules/mod_buffer.so
LoadModule cache_module modules/mod_cache.so
LoadModule cache_disk_module modules/mod_cache_disk.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule data_module modules/mod_data.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule dbd_module modules/mod_dbd.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
#LoadModule dumpio_module modules/mod_dumpio.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule filter_module modules/mod_filter.so
#LoadModule headers_module modules/mod_headers.so
#LoadModule heartbeat_module modules/mod_heartbeat.so
#LoadModule heartmonitor_module modules/mod_heartmonitor.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
#LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
#LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
#LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
#LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
#LoadModule ldap_module modules/mod_ldap.so
#LoadModule logio_module modules/mod_logio.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule lua_module modules/mod_lua.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
#LoadModule proxy_html_module modules/mod_proxy_html.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
#LoadModule reflector_module modules/mod_reflector.so
#LoadModule remoteip_module modules/mod_remoteip.so
#LoadModule request_module modules/mod_request.so
#LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule rewrite_module modules/mod_rewrite.so
#LoadModule sed_module modules/mod_sed.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_crypto_module modules/mod_session_crypto.so
#LoadModule session_dbd_module modules/mod_session_dbd.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
#LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
#LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule ssl_module modules/mod_ssl.so
#LoadModule status_module modules/mod_status.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule unique_id_module modules/mod_unique_id.so
#LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule version_module modules/mod_version.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
#LoadModule watchdog_module modules/mod_watchdog.so
#LoadModule xml2enc_module modules/mod_xml2enc.so
LoadModule php5_module "c:/wamp/bin/php/php5.5.12/php5apache2_4.dll"
#PHPIniDir c:/wamp/bin/php/php5.5.12
<IfModule unixd_module>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User daemon
Group daemon
</IfModule>
# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#
#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. admin@your-domain.com
#
ServerAdmin admin@example.com
#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
ServerName localhost:80
HostnameLookups Off
#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "c:/wamp/www/"
#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
# First, we configure the "default" to be a very restrictive set of
# features.
#
<Directory />
AllowOverride none
Require all denied
</Directory>
#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#
<Directory "c:/wamp/www/">
#
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
# The Options directive is both complicated and important. Please see
# [httpd.apache.org]
# for more information.
#
Options Indexes FollowSymLinks
#
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# AllowOverride FileInfo AuthConfig Limit
#
AllowOverride all
#
# Controls who can get stuff from this server.
#
# onlineoffline tag - don't remove
Require local
</Directory>
#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
DirectoryIndex index.php index.php3 index.html index.htm
</IfModule>
#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<Files ".ht*">
Require all denied
</Files>
#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
#ErrorLog "logs/error.log"
ErrorLog "c:/wamp/logs/apache_error.log"
#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn
<IfModule log_config_module>
#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
#
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
CustomLog "c:/wamp/logs/access.log" common
#
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#
#CustomLog "logs/access.log" combined
</IfModule>
<IfModule alias_module>
#
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo [www.example.com]
#
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
#
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
#
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
#
ScriptAlias /cgi-bin/ "c:/wamp/bin/apache/apache2.4.9/cgi-bin/"
</IfModule>
<IfModule cgid_module>
#
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#
#Scriptsock cgisock
</IfModule>
#
# "c:/wamp/bin/apache/apache2.4.9/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "c:/wamp/bin/apache/apache2.4.9/cgi-bin">
AllowOverride None
Options None
Require all granted
</Directory>
<IfModule mime_module>
#
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
#
TypesConfig conf/mime.types
#
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#
#AddType application/x-gzip .tgz
#
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#
AddEncoding x-compress .Z
AddEncoding x-gzip .gz .tgz
#
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
#
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
AddType application/x-httpd-php .php
AddType application/x-httpd-php .php3
#
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
#
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
#
# Filters allow you to process content before it is sent to the client.
#
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
#MIMEMagicFile conf/magic
#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 [www.example.com]
#
#
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
#
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#
#EnableMMAP off
EnableSendfile off
# AcceptFilter: On Windows, none uses accept() rather than AcceptEx() and
# will not recycle sockets between connections. This is useful for network
# adapters with broken driver support, as well as some virtual network
# providers such as vpn drivers, or spam, virus or spyware filters.
AcceptFilter http none
AcceptFilter https none
# Supplemental configuration
#
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
# Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
#Include conf/extra/httpd-languages.conf
# User home directories
#Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
#Include conf/extra/httpd-default.conf
# Configure mod_proxy_html to understand HTML4/XHTML1
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
#
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
#
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
#
# uncomment out the below to deal with user agents that deliberately
# violate open standards by misusing DNT (DNT *must* be a specific
# end-user choice)
#
#<IfModule setenvif_module>
#BrowserMatch "MSIE 10.0;" bad_DNT
#</IfModule>
#<IfModule headers_module>
#RequestHeader unset DNT env=bad_DNT
#</IfModule>
#IncludeOptional "c:/wamp/vhosts/*"
Include "c:/wamp/alias/*"
Edited 4 time(s). Last edit at 11/07/2014 10:51PM by Kiro.
I have no ISS or Skype etc. running, and the web service thingy is unchecked, as is discussed on many websites. etc. etc.
When I check port 80 for Apache, I get the message that port 80 is nót actually being used.
I also changed the port from 80 tot 80 in another attempt, but this resulted in the fact that I could not reach my Wordpress site anymore.
I also followed these instructions, found on [forum.wampserver.com]:
----
"Step 1:
If you are getting the "your port 80 not actually used" in Windows 8
when you test port 80 from wamp icontray > apache > services > test port 80
open httpd.conf from wamp icontray > apache >httpd.conf and locate the line
#Listen 12.34.56.78:80
Listen 80
Make sure the line Listen 80 is uncommented and is as it is above and if you had changed to Listen 0:0:0:0:80 change it back to
Listen 80
Step 2:
Got to the hosts file C:/windows/system32/Drivers/etc and make sure it only contains 127.0.0.1 localhost and not ::1 ie make sure its shows #::1 if the ::1 is present
#::1
127.0.0.1 localhost
If you get an error "403 Access forbidden" when you try to access phpmyadmin go to step 3
Step 3: smiling smiley (Step courtesy Peter mortensen comment posted in stackoverflow.com link stackoverflow.com/questions/8366976/wamp-error-forbidden-you-dont-have-permission-to-access-phpmyadmin-on-this-s)
Change the content of c:/wamp/apps/alias/phpmyadmin.conf to the following
<directory "c:/wamp/apps/phpmyadmin3.4.5/">
Options Indexes FollowSymLinks MultiViews
AllowOverride all
Order Deny,Allow
Allow from all
</Directory>
NB: The phpmyadmin remains the version you have installed mine was c:/wamp/apps/phpmyadmin3.4.5/
The main thing here is to remove Deny from All and Allow from 127.0.0.1
Then restart Apache server after this and you are good to go."
----
The PHP error log has the following text:
[01-Nov-2014 22:58:50 UTC] PHP Warning: PHP Startup: Unable to load dynamic library 'c:/wamp/bin/php/php5.5.12/ext/php_intl.dll' - Kan opgegeven module niet vinden.
in Unknown on line 0
[01-Nov-2014 22:58:50 UTC] PHP Warning: PHP Startup: Unable to load dynamic library 'c:/wamp/bin/php/php5.5.12/ext/php_ldap.dll' - Kan opgegeven module niet vinden.
in Unknown on line 0
[01-Nov-2014 22:58:50 UTC] PHP Warning: PHP Startup: Unable to load dynamic library 'c:/wamp/bin/php/php5.5.12/ext/php_intl.dll' - Kan opgegeven module niet vinden.
in Unknown on line 0
[01-Nov-2014 22:58:50 UTC] PHP Warning: PHP Startup: Unable to load dynamic library 'c:/wamp/bin/php/php5.5.12/ext/php_ldap.dll' - Kan opgegeven module niet vinden.
in Unknown on line 0
[02-Nov-2014 00:27:20 Europe/Paris] PHP Warning: POST Content-Length of 39570586 bytes exceeds the limit of 3145728 bytes in Unknown on line 0
[02-Nov-2014 00:27:40 Europe/Paris] PHP Warning: POST Content-Length of 39570593 bytes exceeds the limit of 3145728 bytes in Unknown on line 0
[02-Nov-2014 00:51:47 Europe/Paris] PHP Warning: POST Content-Length of 21140420 bytes exceeds the limit of 3145728 bytes in Unknown on line 0
[06-Nov-2014 16:08:19 UTC] PHP Warning: PHP Startup: Unable to load dynamic library 'c:/wamp/bin/php/php5.5.12/ext/php_intl.dll' - Kan opgegeven module niet vinden.
in Unknown on line 0
[06-Nov-2014 16:08:19 UTC] PHP Warning: PHP Startup: Unable to load dynamic library 'c:/wamp/bin/php/php5.5.12/ext/php_ldap.dll' - Kan opgegeven module niet vinden.
in Unknown on line 0
[06-Nov-2014 16:08:20 UTC] PHP Warning: PHP Startup: Unable to load dynamic library 'c:/wamp/bin/php/php5.5.12/ext/php_intl.dll' - Kan opgegeven module niet vinden.
in Unknown on line 0
[06-Nov-2014 16:08:20 UTC] PHP Warning: PHP Startup: Unable to load dynamic library 'c:/wamp/bin/php/php5.5.12/ext/php_ldap.dll' - Kan opgegeven module niet vinden.
in Unknown on line 0
[06-Nov-2014 18:27:23 UTC] PHP Warning: PHP Startup: Unable to load dynamic library 'c:/wamp/bin/php/php5.5.12/ext/php_intl.dll' - Kan opgegeven module niet vinden.
in Unknown on line 0
[06-Nov-2014 18:27:23 UTC] PHP Warning: PHP Startup: Unable to load dynamic library 'c:/wamp/bin/php/php5.5.12/ext/php_ldap.dll' - Kan opgegeven module niet vinden.
in Unknown on line 0
[06-Nov-2014 18:27:24 UTC] PHP Warning: PHP Startup: Unable to load dynamic library 'c:/wamp/bin/php/php5.5.12/ext/php_intl.dll' - Kan opgegeven module niet vinden.
in Unknown on line 0
[06-Nov-2014 18:27:24 UTC] PHP Warning: PHP Startup: Unable to load dynamic library 'c:/wamp/bin/php/php5.5.12/ext/php_ldap.dll' - Kan opgegeven module niet vinden.
in Unknown on line 0
[06-Nov-2014 18:27:32 UTC] PHP Warning: PHP Startup: Unable to load dynamic library 'c:/wamp/bin/php/php5.5.12/ext/php_intl.dll' - Kan opgegeven module niet vinden.
in Unknown on line 0
[06-Nov-2014 18:27:32 UTC] PHP Warning: PHP Startup: Unable to load dynamic library 'c:/wamp/bin/php/php5.5.12/ext/php_ldap.dll' - Kan opgegeven module niet vinden.
in Unknown on line 0
[06-Nov-2014 18:27:33 UTC] PHP Warning: PHP Startup: Unable to load dynamic library 'c:/wamp/bin/php/php5.5.12/ext/php_intl.dll' - Kan opgegeven module niet vinden.
in Unknown on line 0
[06-Nov-2014 18:27:33 UTC] PHP Warning: PHP Startup: Unable to load dynamic library 'c:/wamp/bin/php/php5.5.12/ext/php_ldap.dll' - Kan opgegeven module niet vinden.
in Unknown on line 0
[06-Nov-2014 18:27:40 UTC] PHP Warning: PHP Startup: Unable to load dynamic library 'c:/wamp/bin/php/php5.5.12/ext/php_intl.dll' - Kan opgegeven module niet vinden.
in Unknown on line 0
[06-Nov-2014 18:27:40 UTC] PHP Warning: PHP Startup: Unable to load dynamic library 'c:/wamp/bin/php/php5.5.12/ext/php_ldap.dll' - Kan opgegeven module niet vinden.
in Unknown on line 0
[06-Nov-2014 18:27:41 UTC] PHP Warning: PHP Startup: Unable to load dynamic library 'c:/wamp/bin/php/php5.5.12/ext/php_intl.dll' - Kan opgegeven module niet vinden.
in Unknown on line 0
[06-Nov-2014 18:27:41 UTC] PHP Warning: PHP Startup: Unable to load dynamic library 'c:/wamp/bin/php/php5.5.12/ext/php_ldap.dll' - Kan opgegeven module niet vinden.
in Unknown on line 0
"Kan opgegeven module niet vinden" means the concerning item cannot be found.
----
The Apache Error Log has the following:
[Sat Nov 01 23:58:50.376969 2014] [mpm_winnt:notice] [pid 3264:tid 544] AH00455: Apache/2.4.9 (Win32) PHP/5.5.12 configured -- resuming normal operations
[Sat Nov 01 23:58:50.376969 2014] [mpm_winnt:notice] [pid 3264:tid 544] AH00456: Apache Lounge VC11 Server built: Mar 16 2014 12:13:13
[Sat Nov 01 23:58:50.376969 2014] [core:notice] [pid 3264:tid 544] AH00094: Command line: 'c:\\wamp\\bin\\apache\\apache2.4.9\\bin\\httpd.exe -d C:/wamp/bin/apache/apache2.4.9'
[Sat Nov 01 23:58:50.378971 2014] [mpm_winnt:notice] [pid 3264:tid 544] AH00418: Parent: Created child process 5800
[Sat Nov 01 23:58:50.776626 2014] [mpm_winnt:notice] [pid 5800:tid 480] AH00354: Child: Starting 64 worker threads.
[Sun Nov 02 00:01:55.679799 2014] [authz_core:error] [pid 5800:tid 964] [client ::1:49523] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Sun Nov 02 00:01:55.679799 2014] [authz_core:error] [pid 5800:tid 972] [client ::1:49525] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Sun Nov 02 00:01:55.679799 2014] [authz_core:error] [pid 5800:tid 952] [client ::1:49524] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Sun Nov 02 18:46:14.844754 2014] [authz_core:error] [pid 5800:tid 976] [client ::1:60873] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Sun Nov 02 18:46:14.844754 2014] [authz_core:error] [pid 5800:tid 952] [client ::1:60874] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Sun Nov 02 18:46:14.844754 2014] [authz_core:error] [pid 5800:tid 964] [client ::1:60875] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Sun Nov 02 18:52:51.119237 2014] [authz_core:error] [pid 5800:tid 952] [client ::1:60940] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Sun Nov 02 18:52:51.119237 2014] [authz_core:error] [pid 5800:tid 948] [client ::1:60941] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Sun Nov 02 18:52:51.119237 2014] [authz_core:error] [pid 5800:tid 964] [client ::1:60942] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Sun Nov 02 19:00:51.056643 2014] [authz_core:error] [pid 5800:tid 976] [client ::1:61066] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Sun Nov 02 19:00:51.056643 2014] [authz_core:error] [pid 5800:tid 964] [client ::1:61067] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Sun Nov 02 19:00:51.056643 2014] [authz_core:error] [pid 5800:tid 952] [client ::1:61068] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Sun Nov 02 19:01:50.556968 2014] [authz_core:error] [pid 5800:tid 948] [client ::1:61078] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Sun Nov 02 19:01:50.556968 2014] [authz_core:error] [pid 5800:tid 972] [client ::1:61080] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Sun Nov 02 19:01:50.556968 2014] [authz_core:error] [pid 5800:tid 984] [client ::1:61079] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Sun Nov 02 19:05:16.570515 2014] [authz_core:error] [pid 5800:tid 948] [client ::1:61085] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Sun Nov 02 19:05:16.570515 2014] [authz_core:error] [pid 5800:tid 976] [client ::1:61086] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Sun Nov 02 19:05:16.570515 2014] [authz_core:error] [pid 5800:tid 964] [client ::1:61087] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Sun Nov 02 19:21:56.145831 2014] [authz_core:error] [pid 5800:tid 952] [client ::1:61180] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Sun Nov 02 19:21:56.145831 2014] [authz_core:error] [pid 5800:tid 976] [client ::1:61181] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Sun Nov 02 19:21:56.145831 2014] [authz_core:error] [pid 5800:tid 972] [client ::1:61182] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Sun Nov 02 21:37:40.707463 2014] [authz_core:error] [pid 5800:tid 972] [client ::1:62473] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Sun Nov 02 21:37:40.707463 2014] [authz_core:error] [pid 5800:tid 984] [client ::1:62474] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Sun Nov 02 21:37:40.707463 2014] [authz_core:error] [pid 5800:tid 964] [client ::1:62475] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Sun Nov 02 21:57:54.502370 2014] [authz_core:error] [pid 5800:tid 976] [client ::1:62975] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Sun Nov 02 21:57:54.502370 2014] [authz_core:error] [pid 5800:tid 972] [client ::1:62976] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Sun Nov 02 21:57:54.502370 2014] [authz_core:error] [pid 5800:tid 984] [client ::1:62977] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Tue Nov 04 08:19:30.088388 2014] [authz_core:error] [pid 5800:tid 948] [client ::1:57395] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Tue Nov 04 08:19:30.088388 2014] [authz_core:error] [pid 5800:tid 952] [client ::1:57396] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Tue Nov 04 08:19:30.088388 2014] [authz_core:error] [pid 5800:tid 964] [client ::1:57397] AH01630: client denied by server configuration: C:/Apache24, referer: [localhost]
[Thu Nov 06 17:08:18.987481 2014] [core:warn] [pid 5200:tid 428] AH00098: pid file C:/wamp/bin/apache/apache2.4.9/logs/httpd.pid overwritten -- Unclean shutdown of previous Apache run?
[Thu Nov 06 17:08:19.789035 2014] [mpm_winnt:notice] [pid 5200:tid 428] AH00455: Apache/2.4.9 (Win32) PHP/5.5.12 configured -- resuming normal operations
[Thu Nov 06 17:08:19.790035 2014] [mpm_winnt:notice] [pid 5200:tid 428] AH00456: Apache Lounge VC11 Server built: Mar 16 2014 12:13:13
[Thu Nov 06 17:08:19.790035 2014] [core:notice] [pid 5200:tid 428] AH00094: Command line: 'c:\\wamp\\bin\\apache\\apache2.4.9\\bin\\httpd.exe -d C:/wamp/bin/apache/apache2.4.9'
[Thu Nov 06 17:08:19.852081 2014] [mpm_winnt:notice] [pid 5200:tid 428] AH00418: Parent: Created child process 8064
[Thu Nov 06 17:08:20.475538 2014] [mpm_winnt:notice] [pid 8064:tid 472] AH00354: Child: Starting 64 worker threads.
[Thu Nov 06 19:27:20.486490 2014] [mpm_winnt:notice] [pid 5200:tid 428] AH00422: Parent: Received shutdown signal -- Shutting down the server.
[Thu Nov 06 19:27:22.488228 2014] [mpm_winnt:notice] [pid 8064:tid 472] AH00364: Child: All worker threads have exited.
[Thu Nov 06 19:27:22.537250 2014] [mpm_winnt:notice] [pid 5200:tid 428] AH00430: Parent: Child process 8064 exited successfully.
[Thu Nov 06 19:27:23.571690 2014] [mpm_winnt:notice] [pid 916:tid 544] AH00455: Apache/2.4.9 (Win32) PHP/5.5.12 configured -- resuming normal operations
[Thu Nov 06 19:27:23.571690 2014] [mpm_winnt:notice] [pid 916:tid 544] AH00456: Apache Lounge VC11 Server built: Mar 16 2014 12:13:13
[Thu Nov 06 19:27:23.571690 2014] [core:notice] [pid 916:tid 544] AH00094: Command line: 'c:\\wamp\\bin\\apache\\apache2.4.9\\bin\\httpd.exe -d C:/wamp/bin/apache/apache2.4.9'
[Thu Nov 06 19:27:23.575705 2014] [mpm_winnt:notice] [pid 916:tid 544] AH00418: Parent: Created child process 6712
[Thu Nov 06 19:27:24.103029 2014] [mpm_winnt:notice] [pid 6712:tid 464] AH00354: Child: Starting 64 worker threads.
[Thu Nov 06 19:27:30.135602 2014] [mpm_winnt:notice] [pid 916:tid 544] AH00422: Parent: Received shutdown signal -- Shutting down the server.
[Thu Nov 06 19:27:32.138030 2014] [mpm_winnt:notice] [pid 6712:tid 464] AH00364: Child: All worker threads have exited.
[Thu Nov 06 19:27:32.154029 2014] [mpm_winnt:notice] [pid 916:tid 544] AH00430: Parent: Child process 6712 exited successfully.
[Thu Nov 06 19:27:32.672323 2014] [mpm_winnt:notice] [pid 5472:tid 560] AH00455: Apache/2.4.9 (Win32) PHP/5.5.12 configured -- resuming normal operations
[Thu Nov 06 19:27:32.672323 2014] [mpm_winnt:notice] [pid 5472:tid 560] AH00456: Apache Lounge VC11 Server built: Mar 16 2014 12:13:13
[Thu Nov 06 19:27:32.672323 2014] [core:notice] [pid 5472:tid 560] AH00094: Command line: 'c:\\wamp\\bin\\apache\\apache2.4.9\\bin\\httpd.exe -d C:/wamp/bin/apache/apache2.4.9'
[Thu Nov 06 19:27:32.675325 2014] [mpm_winnt:notice] [pid 5472:tid 560] AH00418: Parent: Created child process 3540
[Thu Nov 06 19:27:33.188795 2014] [mpm_winnt:notice] [pid 3540:tid 336] AH00354: Child: Starting 64 worker threads.
[Thu Nov 06 19:27:37.268136 2014] [mpm_winnt:notice] [pid 5472:tid 560] AH00422: Parent: Received shutdown signal -- Shutting down the server.
[Thu Nov 06 19:27:39.270545 2014] [mpm_winnt:notice] [pid 3540:tid 336] AH00364: Child: All worker threads have exited.
[Thu Nov 06 19:27:39.287548 2014] [mpm_winnt:notice] [pid 5472:tid 560] AH00430: Parent: Child process 3540 exited successfully.
[Thu Nov 06 19:27:40.928716 2014] [mpm_winnt:notice] [pid 5216:tid 548] AH00455: Apache/2.4.9 (Win32) PHP/5.5.12 configured -- resuming normal operations
[Thu Nov 06 19:27:40.928716 2014] [mpm_winnt:notice] [pid 5216:tid 548] AH00456: Apache Lounge VC11 Server built: Mar 16 2014 12:13:13
[Thu Nov 06 19:27:40.928716 2014] [core:notice] [pid 5216:tid 548] AH00094: Command line: 'c:\\wamp\\bin\\apache\\apache2.4.9\\bin\\httpd.exe -d C:/wamp/bin/apache/apache2.4.9'
[Thu Nov 06 19:27:40.931718 2014] [mpm_winnt:notice] [pid 5216:tid 548] AH00418: Parent: Created child process 4528
[Thu Nov 06 19:27:41.446069 2014] [mpm_winnt:notice] [pid 4528:tid 464] AH00354: Child: Starting 64 worker threads.
[Thu Nov 06 19:48:14.894902 2014] [mpm_winnt:notice] [pid 5216:tid 548] AH00422: Parent: Received shutdown signal -- Shutting down the server.
[Thu Nov 06 19:48:16.896147 2014] [mpm_winnt:notice] [pid 4528:tid 464] AH00364: Child: All worker threads have exited.
[Thu Nov 06 19:48:16.922154 2014] [mpm_winnt:notice] [pid 5216:tid 548] AH00430: Parent: Child process 4528 exited successfully.
----
Unfortunately, I do not know what to make of these logs, probably due to the fact that I have little knowledge about these things and computers in general.
I have no clue what it can be and am about to give up. Hopefully someone here has ideas to solve the problem.
----
This is the phpmyadmin.config file:
Alias /phpmyadmin "c:/wamp/apps/phpmyadmin4.1.14/"
# to give access to phpmyadmin from outside
# replace the lines
#
# Require local
#
# by
#
# Require all granted
#
<Directory "c:/wamp/apps/phpmyadmin4.1.14/">
Options Indexes FollowSymLinks MultiViews
AllowOverride all
<IfDefine APACHE24>
Require local
</IfDefine>
<IfDefine !APACHE24>
Order Deny,Allow
Deny from all Allow from localhost ::1 127.0.0.1 </IfDefine>
php_admin_value upload_max_filesize 128M
php_admin_value post_max_size 128M
php_admin_value max_execution_time 360
php_admin_value max_input_time 360
</Directory>
----
This is the httpd.conf file:
#
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:[httpd.apache.org]; for detailed information.
# In particular, see
# <URL:[httpd.apache.org];
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
# will be interpreted as '/logs/access_log'.
#
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache"
.# If a drive letter is omitted, the drive on which httpd.exe is located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths to avoid confusion.
ServerSignature On
ServerTokens Full
#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used. If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
#
ServerRoot "c:/wamp/bin/apache/apache2.4.9"
Define APACHE24 Apache2.4
#
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
#
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
#
# Mutex default:logs
#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:808Listen 80Listen [::0]:80
#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule allowmethods_module modules/mod_allowmethods.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_core_module modules/mod_authn_core.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_socache_module modules/mod_authn_socache.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule authz_core_module modules/mod_authz_core.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule buffer_module modules/mod_buffer.so
LoadModule cache_module modules/mod_cache.so
LoadModule cache_disk_module modules/mod_cache_disk.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule data_module modules/mod_data.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule dbd_module modules/mod_dbd.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
#LoadModule dumpio_module modules/mod_dumpio.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule filter_module modules/mod_filter.so
#LoadModule headers_module modules/mod_headers.so
#LoadModule heartbeat_module modules/mod_heartbeat.so
#LoadModule heartmonitor_module modules/mod_heartmonitor.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
#LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
#LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
#LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
#LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
#LoadModule ldap_module modules/mod_ldap.so
#LoadModule logio_module modules/mod_logio.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule lua_module modules/mod_lua.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
#LoadModule proxy_html_module modules/mod_proxy_html.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
#LoadModule reflector_module modules/mod_reflector.so
#LoadModule remoteip_module modules/mod_remoteip.so
#LoadModule request_module modules/mod_request.so
#LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule rewrite_module modules/mod_rewrite.so
#LoadModule sed_module modules/mod_sed.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_crypto_module modules/mod_session_crypto.so
#LoadModule session_dbd_module modules/mod_session_dbd.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
#LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
#LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule ssl_module modules/mod_ssl.so
#LoadModule status_module modules/mod_status.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule unique_id_module modules/mod_unique_id.so
#LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule version_module modules/mod_version.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
#LoadModule watchdog_module modules/mod_watchdog.so
#LoadModule xml2enc_module modules/mod_xml2enc.so
LoadModule php5_module "c:/wamp/bin/php/php5.5.12/php5apache2_4.dll"
#PHPIniDir c:/wamp/bin/php/php5.5.12
<IfModule unixd_module>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User daemon
Group daemon
</IfModule>
# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#
#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. admin@your-domain.com
#
ServerAdmin admin@example.com
#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
ServerName localhost:80
HostnameLookups Off
#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "c:/wamp/www/"
#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
# First, we configure the "default" to be a very restrictive set of
# features.
#
<Directory />
AllowOverride none
Require all denied
</Directory>
#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#
<Directory "c:/wamp/www/">
#
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
# The Options directive is both complicated and important. Please see
# [httpd.apache.org]
# for more information.
#
Options Indexes FollowSymLinks
#
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# AllowOverride FileInfo AuthConfig Limit
#
AllowOverride all
#
# Controls who can get stuff from this server.
#
# onlineoffline tag - don't remove
Require local
</Directory>
#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
DirectoryIndex index.php index.php3 index.html index.htm
</IfModule>
#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<Files ".ht*">
Require all denied
</Files>
#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
#ErrorLog "logs/error.log"
ErrorLog "c:/wamp/logs/apache_error.log"
#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn
<IfModule log_config_module>
#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
#
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
CustomLog "c:/wamp/logs/access.log" common
#
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#
#CustomLog "logs/access.log" combined
</IfModule>
<IfModule alias_module>
#
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo [www.example.com]
#
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
#
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
#
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
#
ScriptAlias /cgi-bin/ "c:/wamp/bin/apache/apache2.4.9/cgi-bin/"
</IfModule>
<IfModule cgid_module>
#
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#
#Scriptsock cgisock
</IfModule>
#
# "c:/wamp/bin/apache/apache2.4.9/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "c:/wamp/bin/apache/apache2.4.9/cgi-bin">
AllowOverride None
Options None
Require all granted
</Directory>
<IfModule mime_module>
#
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
#
TypesConfig conf/mime.types
#
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#
#AddType application/x-gzip .tgz
#
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#
AddEncoding x-compress .Z
AddEncoding x-gzip .gz .tgz
#
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
#
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
AddType application/x-httpd-php .php
AddType application/x-httpd-php .php3
#
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
#
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
#
# Filters allow you to process content before it is sent to the client.
#
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
#MIMEMagicFile conf/magic
#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 [www.example.com]
#
#
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
#
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#
#EnableMMAP off
EnableSendfile off
# AcceptFilter: On Windows, none uses accept() rather than AcceptEx() and
# will not recycle sockets between connections. This is useful for network
# adapters with broken driver support, as well as some virtual network
# providers such as vpn drivers, or spam, virus or spyware filters.
AcceptFilter http none
AcceptFilter https none
# Supplemental configuration
#
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
# Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
#Include conf/extra/httpd-languages.conf
# User home directories
#Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
#Include conf/extra/httpd-default.conf
# Configure mod_proxy_html to understand HTML4/XHTML1
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
#
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
#
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
#
# uncomment out the below to deal with user agents that deliberately
# violate open standards by misusing DNT (DNT *must* be a specific
# end-user choice)
#
#<IfModule setenvif_module>
#BrowserMatch "MSIE 10.0;" bad_DNT
#</IfModule>
#<IfModule headers_module>
#RequestHeader unset DNT env=bad_DNT
#</IfModule>
#IncludeOptional "c:/wamp/vhosts/*"
Include "c:/wamp/alias/*"
Edited 4 time(s). Last edit at 11/07/2014 10:51PM by Kiro.
Re: Wamp > Apache > does not work
Posted by:
Kiro
(---.access.telenet.be)
Date: November 07, 2014 12:35PM
*Text now included in first post.*
Edited 1 time(s). Last edit at 11/07/2014 01:35PM by Kiro.
Edited 1 time(s). Last edit at 11/07/2014 01:35PM by Kiro.
Re: Wamp > Apache > does not work
Posted by:
RiggsFolly
(---.dynamic.dsl.as9105.com)
Date: November 07, 2014 01:01PM
OK lets start by looking at the 'Apache error log' and the 'php error log' what do they tell you?
If that is not any help then lets look at the 'Windows Event Log` for messages from Apache.
Does any of that help?
Please can you add the answers to there questions to your next post....[forum.wampserver.com]
---------------------------------------------------------------------------------------------
(Windows 10 Pro 64bit) (Wampserver 3.3.4 64bit) Aestan Tray Menu 3.2.5.4
<Apache versions MULTIPE> <PHP versions MULTIPLE> <MySQL Versions MULTIPLE>
<MariaDB versions MULTIPLE> <phpMyAdmin versions MULTIPLE> <MySQL Workbench 8.0.23>
Read The Manuals Apache -- MySQL -- PHP -- phpMyAdmin
Get your Apache/MySQL/mariaDB/PHP ADDONs here from the WAMPServer alternate Repo
-X-X-X- Backup your databases regularly Here is How dont regret it later! Yes even when developing -X-X-X-
If that is not any help then lets look at the 'Windows Event Log` for messages from Apache.
Does any of that help?
Please can you add the answers to there questions to your next post....[forum.wampserver.com]
---------------------------------------------------------------------------------------------
(Windows 10 Pro 64bit) (Wampserver 3.3.4 64bit) Aestan Tray Menu 3.2.5.4
<Apache versions MULTIPE> <PHP versions MULTIPLE> <MySQL Versions MULTIPLE>
<MariaDB versions MULTIPLE> <phpMyAdmin versions MULTIPLE> <MySQL Workbench 8.0.23>
Read The Manuals Apache -- MySQL -- PHP -- phpMyAdmin
Get your Apache/MySQL/mariaDB/PHP ADDONs here from the WAMPServer alternate Repo
-X-X-X- Backup your databases regularly Here is How dont regret it later! Yes even when developing -X-X-X-
Re: Wamp > Apache > does not work
Posted by:
Kiro
(---.access.telenet.be)
Date: November 07, 2014 01:38PM
I have included both error logs in the initial post. Unfortunately I have no idea what to look for. I don't know much about these things at all.
Do you have any idea?
I was thinking: perhaps I should change the port into 8080 again (which I just tried, but suddenly that won't get the green icon anymore...), and subsequently find a way to change the portnumber for Wordpress in some file (don't know which one yet)...
Do you have any idea?
I was thinking: perhaps I should change the port into 8080 again (which I just tried, but suddenly that won't get the green icon anymore...), and subsequently find a way to change the portnumber for Wordpress in some file (don't know which one yet)...
Re: Wamp > Apache > does not work
Posted by:
RiggsFolly
(---.dynamic.dsl.as9105.com)
Date: November 07, 2014 01:58PM
Ok lets start by removing the bad advice you followed :-
1. Fix the Listen command in httpd.conf. It should be
Also check this line in httpd.conf it should be
Now to the HOSTS file. It should be :-
2. The changes you made to c:\wamp\alias\phpmyadmin.conf are not especially wrong but are definitely insecure. So they should be
Now having put things back the way they should be, try starting WAMPServer. If it was runnig while you made the changes the exit WAMPServer and restart it.
Then please tell me what the colour of the wampmanager icon is in the system tray.
If it is not GREEN, check using the wampmanager menus to see which service has not started.
Do wampmanager -> Apache -> Service , If the 'Start/Resume' is green in colour, then Apache has not started
Do wampmanager -> MySQL -> Service , If the 'Start/Resume' is green in colour, then MySQL has not started
If Apache is the service that has not started, try this to see if some other process has grabbed port 80.
wampmanager -> Apache -> Test Port 80
What does that say?
Whatever happens, let me know
---------------------------------------------------------------------------------------------
(Windows 10 Pro 64bit) (Wampserver 3.3.4 64bit) Aestan Tray Menu 3.2.5.4
<Apache versions MULTIPE> <PHP versions MULTIPLE> <MySQL Versions MULTIPLE>
<MariaDB versions MULTIPLE> <phpMyAdmin versions MULTIPLE> <MySQL Workbench 8.0.23>
Read The Manuals Apache -- MySQL -- PHP -- phpMyAdmin
Get your Apache/MySQL/mariaDB/PHP ADDONs here from the WAMPServer alternate Repo
-X-X-X- Backup your databases regularly Here is How dont regret it later! Yes even when developing -X-X-X-
1. Fix the Listen command in httpd.conf. It should be
#Listen 12.34.56.78:80 Listen 0.0.0.0:80 Listen [::0]:80
Also check this line in httpd.conf it should be
ServerName localhost:80
Now to the HOSTS file. It should be :-
127.0.0.1 localhost ::1 localhost
2. The changes you made to c:\wamp\alias\phpmyadmin.conf are not especially wrong but are definitely insecure. So they should be
<Directory "d:/wamp/apps/phpmyadmin4.1.14/">
Options Indexes FollowSymLinks MultiViews
AllowOverride all
<IfDefine APACHE24>
Require local
</IfDefine>
<IfDefine !APACHE24>
Order Deny,Allow
Deny from all
Allow from localhost ::1 127.0.0.1
</IfDefine>
php_admin_value upload_max_filesize 128M
php_admin_value post_max_size 128M
php_admin_value max_execution_time 360
php_admin_value max_input_time 360
</Directory>Now having put things back the way they should be, try starting WAMPServer. If it was runnig while you made the changes the exit WAMPServer and restart it.
Then please tell me what the colour of the wampmanager icon is in the system tray.
If it is not GREEN, check using the wampmanager menus to see which service has not started.
Do wampmanager -> Apache -> Service , If the 'Start/Resume' is green in colour, then Apache has not started
Do wampmanager -> MySQL -> Service , If the 'Start/Resume' is green in colour, then MySQL has not started
If Apache is the service that has not started, try this to see if some other process has grabbed port 80.
wampmanager -> Apache -> Test Port 80
What does that say?
Whatever happens, let me know
---------------------------------------------------------------------------------------------
(Windows 10 Pro 64bit) (Wampserver 3.3.4 64bit) Aestan Tray Menu 3.2.5.4
<Apache versions MULTIPE> <PHP versions MULTIPLE> <MySQL Versions MULTIPLE>
<MariaDB versions MULTIPLE> <phpMyAdmin versions MULTIPLE> <MySQL Workbench 8.0.23>
Read The Manuals Apache -- MySQL -- PHP -- phpMyAdmin
Get your Apache/MySQL/mariaDB/PHP ADDONs here from the WAMPServer alternate Repo
-X-X-X- Backup your databases regularly Here is How dont regret it later! Yes even when developing -X-X-X-
Re: Wamp > Apache > does not work
Posted by:
Kiro
(---.access.telenet.be)
Date: November 07, 2014 02:10PM
I changed things back the way they were. Okay. All the rest I did a couple of times already (not meant to sound ungrateful at all!).
I started the service, but the Wamp icon is (still) orange. I checked, and it is Apache which is not working. I tested the port, and nothing is using it.
I started the service, but the Wamp icon is (still) orange. I checked, and it is Apache which is not working. I tested the port, and nothing is using it.
Re: Wamp > Apache > does not work
Posted by:
RiggsFolly
(---.dynamic.dsl.as9105.com)
Date: November 07, 2014 09:00PM
If APache has not started then there must either be information that is relevant in the Apache error log OR MORE LIKELY in the Windows Event Log.
Look at the 'windows Event log' using the 'Windows Event Viewer' Find messages probably with a RED icon beside them from Apache and tell me what they are.
---------------------------------------------------------------------------------------------
(Windows 10 Pro 64bit) (Wampserver 3.3.4 64bit) Aestan Tray Menu 3.2.5.4
<Apache versions MULTIPE> <PHP versions MULTIPLE> <MySQL Versions MULTIPLE>
<MariaDB versions MULTIPLE> <phpMyAdmin versions MULTIPLE> <MySQL Workbench 8.0.23>
Read The Manuals Apache -- MySQL -- PHP -- phpMyAdmin
Get your Apache/MySQL/mariaDB/PHP ADDONs here from the WAMPServer alternate Repo
-X-X-X- Backup your databases regularly Here is How dont regret it later! Yes even when developing -X-X-X-
Look at the 'windows Event log' using the 'Windows Event Viewer' Find messages probably with a RED icon beside them from Apache and tell me what they are.
---------------------------------------------------------------------------------------------
(Windows 10 Pro 64bit) (Wampserver 3.3.4 64bit) Aestan Tray Menu 3.2.5.4
<Apache versions MULTIPE> <PHP versions MULTIPLE> <MySQL Versions MULTIPLE>
<MariaDB versions MULTIPLE> <phpMyAdmin versions MULTIPLE> <MySQL Workbench 8.0.23>
Read The Manuals Apache -- MySQL -- PHP -- phpMyAdmin
Get your Apache/MySQL/mariaDB/PHP ADDONs here from the WAMPServer alternate Repo
-X-X-X- Backup your databases regularly Here is How dont regret it later! Yes even when developing -X-X-X-
Re: Wamp > Apache > does not work
Posted by:
Kiro
(---.access.telenet.be)
Date: November 07, 2014 10:24PM
Alright, this is what I found, from newest to oldest:
1: The Apache service named
reported the following error: >>>
httpd.exe: Syntax error on line 552 of C:/wamp/bin/apache/apache2.4.9/conf/httpd.conf: Syntax error on line 19 of C:/wamp/alias/phpmyadmin.conf: Expected </IfDefine> but saw </Directory>
2: The Apache service named
reported the following error: >>>
Port must be specified
3: The Apache service named
reported the following error: >>>
AH00526: Syntax error on line 62 of C:/wamp/bin/apache/apache2.4.9/conf/httpd.conf:
4: The Apache service named
reported the following error: >>>
AH00015: Unable to open logs
5: The Apache service named
reported the following error: >>>
AH00451: no listening sockets available, shutting down
6: The Apache service named
reported the following error: >>>
(OS 10013)Er is geprobeerd toegang te verkrijgen tot een socket op een volgens de toegangsmachtigingen niet toegestane manier. : AH00072: make_sock: could not bind to address [::]:80
7: The Apache service named
reported the following error: >>>
(OS 10013)Er is geprobeerd toegang te verkrijgen tot een socket op een volgens de toegangsmachtigingen niet toegestane manier. : AH00072: make_sock: could not bind to address 0.0.0.0:80
These errors appear several times up to 5 November.
1: The Apache service named
reported the following error: >>>
httpd.exe: Syntax error on line 552 of C:/wamp/bin/apache/apache2.4.9/conf/httpd.conf: Syntax error on line 19 of C:/wamp/alias/phpmyadmin.conf: Expected </IfDefine> but saw </Directory>
2: The Apache service named
reported the following error: >>>
Port must be specified
3: The Apache service named
reported the following error: >>>
AH00526: Syntax error on line 62 of C:/wamp/bin/apache/apache2.4.9/conf/httpd.conf:
4: The Apache service named
reported the following error: >>>
AH00015: Unable to open logs
5: The Apache service named
reported the following error: >>>
AH00451: no listening sockets available, shutting down
6: The Apache service named
reported the following error: >>>
(OS 10013)Er is geprobeerd toegang te verkrijgen tot een socket op een volgens de toegangsmachtigingen niet toegestane manier. : AH00072: make_sock: could not bind to address [::]:80
7: The Apache service named
reported the following error: >>>
(OS 10013)Er is geprobeerd toegang te verkrijgen tot een socket op een volgens de toegangsmachtigingen niet toegestane manier. : AH00072: make_sock: could not bind to address 0.0.0.0:80
These errors appear several times up to 5 November.
Re: Wamp > Apache > does not work
Posted by:
RiggsFolly
(---.dynamic.dsl.as9105.com)
Date: November 07, 2014 10:42PM
Right so
post your C:/wamp/alias/phpmyadmin.conf file unless youfixed the error already.
post your C:/wamp/bin/apache/apache2.4.9/conf/httpd.conf
---------------------------------------------------------------------------------------------
(Windows 10 Pro 64bit) (Wampserver 3.3.4 64bit) Aestan Tray Menu 3.2.5.4
<Apache versions MULTIPE> <PHP versions MULTIPLE> <MySQL Versions MULTIPLE>
<MariaDB versions MULTIPLE> <phpMyAdmin versions MULTIPLE> <MySQL Workbench 8.0.23>
Read The Manuals Apache -- MySQL -- PHP -- phpMyAdmin
Get your Apache/MySQL/mariaDB/PHP ADDONs here from the WAMPServer alternate Repo
-X-X-X- Backup your databases regularly Here is How dont regret it later! Yes even when developing -X-X-X-
post your C:/wamp/alias/phpmyadmin.conf file unless youfixed the error already.
post your C:/wamp/bin/apache/apache2.4.9/conf/httpd.conf
---------------------------------------------------------------------------------------------
(Windows 10 Pro 64bit) (Wampserver 3.3.4 64bit) Aestan Tray Menu 3.2.5.4
<Apache versions MULTIPE> <PHP versions MULTIPLE> <MySQL Versions MULTIPLE>
<MariaDB versions MULTIPLE> <phpMyAdmin versions MULTIPLE> <MySQL Workbench 8.0.23>
Read The Manuals Apache -- MySQL -- PHP -- phpMyAdmin
Get your Apache/MySQL/mariaDB/PHP ADDONs here from the WAMPServer alternate Repo
-X-X-X- Backup your databases regularly Here is How dont regret it later! Yes even when developing -X-X-X-
Re: Wamp > Apache > does not work
Posted by:
Kiro
(---.access.telenet.be)
Date: November 07, 2014 10:52PM
Okay, I posted both. See first post.
Re: Wamp > Apache > does not work
Posted by:
RiggsFolly
(---.dynamic.dsl.as9105.com)
Date: November 07, 2014 10:58PM
Ok it looks like something or someone has made a mess of both of those files.
It could be that you are using notepad to edit them.
Can I suggest that you download notepadd++ its a great editor and it is free and can cope with the file types that exist in Wampservr 2.5
I exect that your playing with these files using notepad has messed them up.
It may be simpler to uninstall WAMPServer, delete the c:wamp folder, and then reinstall WAMPServer
Then use notepad++ and not notepad to edit any WAMPServer files from then on.
---------------------------------------------------------------------------------------------
(Windows 10 Pro 64bit) (Wampserver 3.3.4 64bit) Aestan Tray Menu 3.2.5.4
<Apache versions MULTIPE> <PHP versions MULTIPLE> <MySQL Versions MULTIPLE>
<MariaDB versions MULTIPLE> <phpMyAdmin versions MULTIPLE> <MySQL Workbench 8.0.23>
Read The Manuals Apache -- MySQL -- PHP -- phpMyAdmin
Get your Apache/MySQL/mariaDB/PHP ADDONs here from the WAMPServer alternate Repo
-X-X-X- Backup your databases regularly Here is How dont regret it later! Yes even when developing -X-X-X-
It could be that you are using notepad to edit them.
Can I suggest that you download notepadd++ its a great editor and it is free and can cope with the file types that exist in Wampservr 2.5
I exect that your playing with these files using notepad has messed them up.
It may be simpler to uninstall WAMPServer, delete the c:wamp folder, and then reinstall WAMPServer
Then use notepad++ and not notepad to edit any WAMPServer files from then on.
---------------------------------------------------------------------------------------------
(Windows 10 Pro 64bit) (Wampserver 3.3.4 64bit) Aestan Tray Menu 3.2.5.4
<Apache versions MULTIPE> <PHP versions MULTIPLE> <MySQL Versions MULTIPLE>
<MariaDB versions MULTIPLE> <phpMyAdmin versions MULTIPLE> <MySQL Workbench 8.0.23>
Read The Manuals Apache -- MySQL -- PHP -- phpMyAdmin
Get your Apache/MySQL/mariaDB/PHP ADDONs here from the WAMPServer alternate Repo
-X-X-X- Backup your databases regularly Here is How dont regret it later! Yes even when developing -X-X-X-
Re: Wamp > Apache > does not workYou don't have permission to access /phpmyadmin/ on this server
Posted by:
ecocentral
(24.244.23.---)
Date: December 14, 2014 02:57AM
I can run the installed joomla apps on wampserver but access is denied to phpmyadmin4.1.14 I was able to access it before but suddenly I am locked out. Perhaps there is a password I am missing but the option to use one is not showing. I just get the error
Forbidden
You don't have permission to access /phpmyadmin/ on this server.
Apache/2.4.9 (Win32) PHP/5.5.12 Server at localhost Port 80
Recently when I was accessing mail on my windows 8 laptop It required me to use the microsoft password and then reset my computer login. It deleted my local login so I recreated it. I am wondering if my computer login password was used to access phpmyadmin? Any way I have tried all the above without success. The only thing I can think of is to reinstall wampserver.
I am wondering if I can save the www directory and mysql database and just replace them into the new install?
Jim
Forbidden
You don't have permission to access /phpmyadmin/ on this server.
Apache/2.4.9 (Win32) PHP/5.5.12 Server at localhost Port 80
Recently when I was accessing mail on my windows 8 laptop It required me to use the microsoft password and then reset my computer login. It deleted my local login so I recreated it. I am wondering if my computer login password was used to access phpmyadmin? Any way I have tried all the above without success. The only thing I can think of is to reinstall wampserver.
I am wondering if I can save the www directory and mysql database and just replace them into the new install?
Jim
Re: Wamp > Apache > does not workYou don't have permission to access /phpmyadmin/ on this server
Posted by:
RiggsFolly
(---.as43234.net)
Date: December 14, 2014 04:43PM
Hi Jim,
Sounds like a strange situation.
Its always useful to know what versions of everything you are using, could you answer these questions please, [forum.wampserver.com]
This general issue with phpMyAdmin seems to be happening a lot lately and I would love to know what is actually the cause.
How are you trying to access phpMyAdmin i.e. what are you clicking on or what are you entering in the browser URL.
If you want to try the re-install option, read this carefully. It describes how to install a new version of wampserver without loosing anything from your old install. You can then just copy over whats required from the old install.
---------------------------------------------------------------------------------------------
(Windows 10 Pro 64bit) (Wampserver 3.3.4 64bit) Aestan Tray Menu 3.2.5.4
<Apache versions MULTIPE> <PHP versions MULTIPLE> <MySQL Versions MULTIPLE>
<MariaDB versions MULTIPLE> <phpMyAdmin versions MULTIPLE> <MySQL Workbench 8.0.23>
Read The Manuals Apache -- MySQL -- PHP -- phpMyAdmin
Get your Apache/MySQL/mariaDB/PHP ADDONs here from the WAMPServer alternate Repo
-X-X-X- Backup your databases regularly Here is How dont regret it later! Yes even when developing -X-X-X-
Sounds like a strange situation.
Its always useful to know what versions of everything you are using, could you answer these questions please, [forum.wampserver.com]
This general issue with phpMyAdmin seems to be happening a lot lately and I would love to know what is actually the cause.
How are you trying to access phpMyAdmin i.e. what are you clicking on or what are you entering in the browser URL.
If you want to try the re-install option, read this carefully. It describes how to install a new version of wampserver without loosing anything from your old install. You can then just copy over whats required from the old install.
---------------------------------------------------------------------------------------------
(Windows 10 Pro 64bit) (Wampserver 3.3.4 64bit) Aestan Tray Menu 3.2.5.4
<Apache versions MULTIPE> <PHP versions MULTIPLE> <MySQL Versions MULTIPLE>
<MariaDB versions MULTIPLE> <phpMyAdmin versions MULTIPLE> <MySQL Workbench 8.0.23>
Read The Manuals Apache -- MySQL -- PHP -- phpMyAdmin
Get your Apache/MySQL/mariaDB/PHP ADDONs here from the WAMPServer alternate Repo
-X-X-X- Backup your databases regularly Here is How dont regret it later! Yes even when developing -X-X-X-
Sorry, only registered users may post in this forum.
