WampServer

Bonjour, j'ai installé wamp il y a quelque jours, je peux accéder à localhost sans problèmes, mais la page de phpmyadmin est blanche.

J'ai fais quelques recherches mais suis un peu perdu.

L'icône wamp est jaune au centre

-Aucun programme ne bloque le port 80.

-Remplacer localhost par 127.0.0.1 ne change rien.

S'il y a besoin de plus d'infos...

Et merci d'avance.

Bonjour,

Le service MySQL n'est pas lancé.

Regardez :

- Icône Wampserver, MySql, Service puis Supprimer le service.
- idem, mais Installer le service
- idem, mais Démarrer le service

- contenu du fichier de log : "wamp\logs\mysql.log"

Il se pourrait que vous ayez un résidu d'installation d'un autre serveur MySQL, comme un fichier my.ini autre part que dans wamp\bin\mysql\mysql5.1.36\my.ini

---------------------------------------------------------------
Documentation Apache - Documentation PHP - Documentation MySQL - Wampserver install files & addons

J'ai supprimer un fichier my.ini dans Windows et maintenant l'icône est blanche, mais phpmyadmin toujours inacessible.

Contenu de mysql.log :

101009 9:37:16 [Note] wampmysqld: Normal shutdown

101009 9:37:16 [Note] Event Scheduler: Purging the queue. 0 events
101009 9:37:16 InnoDB: Starting shutdown...
101009 9:37:17 InnoDB: Shutdown completed; log sequence number 0 46409
101009 9:37:17 [Warning] Forcing shutdown of 1 plugins
101009 9:37:17 [Note] wampmysqld: Shutdown complete



Modifie 2 fois. Derniere modification le 09/10/2010 à 09:40 par Sullivax.

Aucune idée ?

Bonjour,

Peut-on savoir ce que vous avez mis dans votre my.ini ?

Contenu complet :

# Example MySQL config file for medium systems.
#
# This is for a system with little memory (32M - 64M) where MySQL plays
# an important part, or systems up to 128M where MySQL is used together with
# other programs (such as a web server)
#
# You can copy this file to
# /etc/my.cnf to set global options,
# mysql-data-dir/my.cnf to set server-specific options (in this
# installation this directory is C:\mysql\data) or
# ~/.my.cnf to set user-specific options.
#
# In this file, you can use all long options that a program supports.
# If you want to know which options a program supports, run the program
# with the "--help" option.

# The following options will be passed to all MySQL clients
[client]
#password = your_password
port = 3306
socket = /tmp/mysql.sock

# Here follows entries for some specific programs

# The MySQL server
[wampmysqld]
port = 3306
socket = /tmp/mysql.sock
skip-locking
key_buffer = 16M
max_allowed_packet = 1M
table_cache = 64
sort_buffer_size = 512K
net_buffer_length = 8K
read_buffer_size = 256K
read_rnd_buffer_size = 512K
myisam_sort_buffer_size = 8M
basedir=c:/wamp/bin/mysql/mysql5.1.36
log-error=c:/wamp/logs/mysql.log
datadir=c:/wamp/bin/mysql/mysql5.1.36/data

# Don't listen on a TCP/IP port at all. This can be a security enhancement,
# if all processes that need to connect to mysqld run on the same host.
# All interaction with mysqld must be made via Unix sockets or named pipes.
# Note that using this option without enabling named pipes on Windows
# (via the "enable-named-pipe" option) will render mysqld useless!
#
#skip-networking

# Disable Federated by default
skip-federated

# Replication Master Server (default)
# binary logging is required for replication
log-bin=mysql-bin

# binary logging format - mixed recommended
binlog_format=mixed

# required unique id between 1 and 2^32 - 1
# defaults to 1 if master-host is not set
# but will not function as a master if omitted
server-id = 1

# Replication Slave (comment out master section to use this)
#
# To configure this host as a replication slave, you can choose between
# two methods :
#
# 1) Use the CHANGE MASTER TO command (fully described in our manual) -
# the syntax is:
#
# CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,
# MASTER_USER=<user>, MASTER_PASSWORD=<password> ;
#
# where you replace <host>, <user>, <password> by quoted strings and
# <port> by the master's port number (3306 by default).
#
# Example:
#
# CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,
# MASTER_USER='joe', MASTER_PASSWORD='secret';
#
# OR
#
# 2) Set the variables below. However, in case you choose this method, then
# start replication for the first time (even unsuccessfully, for example
# if you mistyped the password in master-password and the slave fails to
# connect), the slave will create a master.info file, and any later
# change in this file to the variables' values below will be ignored and
# overridden by the content of the master.info file, unless you shutdown
# the slave server, delete master.info and restart the slaver server.
# For that reason, you may want to leave the lines below untouched
# (commented) and instead use CHANGE MASTER TO (see above)
#
# required unique id between 2 and 2^32 - 1
# (and different from the master)
# defaults to 2 if master-host is set
# but will not function as a slave if omitted
#server-id = 2
#
# The replication master for this slave - required
#master-host = <hostname>
#
# The username the slave will use for authentication when connecting
# to the master - required
#master-user = <username>
#
# The password the slave will authenticate with when connecting to
# the master - required
#master-password = <password>
#
# The port the master is listening on.
# optional - defaults to 3306
#master-port = <port>
#
# binary logging - not required for slaves, but recommended
#log-bin=mysql-bin

# Point the following paths to different dedicated disks
#tmpdir = /tmp/
#log-update = /path-to-dedicated-directory/hostname

# Uncomment the following if you are using InnoDB tables
#innodb_data_home_dir = C:\mysql\data/
#innodb_data_file_path = ibdata1:10M:autoextend
#innodb_log_group_home_dir = C:\mysql\data/
#innodb_log_arch_dir = C:\mysql\data/
# You can set .._buffer_pool_size up to 50 - 80 %
# of RAM but beware of setting memory usage too high
#innodb_buffer_pool_size = 16M
#innodb_additional_mem_pool_size = 2M
# Set .._log_file_size to 25 % of buffer pool size
#innodb_log_file_size = 5M
#innodb_log_buffer_size = 8M
#innodb_flush_log_at_trx_commit = 1
#innodb_lock_wait_timeout = 50

[mysqldump]
quick
max_allowed_packet = 16M

[mysql]
no-auto-rehash
# Remove the next comment character if you are not familiar with SQL
#safe-updates

[isamchk]
key_buffer = 20M
sort_buffer_size = 20M
read_buffer = 2M
write_buffer = 2M

[myisamchk]
key_buffer = 20M
sort_buffer_size = 20M
read_buffer = 2M
write_buffer = 2M

[mysqlhotcopy]
interactive-timeout

[mysqld]
port=3306

Bonjour Sullivax, je suivais ton fil de près. J'ai trouvé une réponse (enfin pour moi ça a marché).

J'ai modifié le port dans httpd.conf:

* Listen 80 => Listen 555

* ServerName localhost:80 => ServerName localhost:555

et pour te connecter c'est [localhost]

Voilà j'espère que ça te sera utile

Si l'icone de Wamp est blanche, c'est que les deux services sont maintenant en fonctionnement.

Il faut vérifier que le fichier C:\Windows\system32\drivers\etc\hosts (sans extension) contient uniquement la ligne suivante (commentaires # mis à part) :
127.0.0.1 localhost

Si tu as des problèmes pour éditer le fichier, déplaces le sur le bureau, modifies le, puis remet le à sa place.
Ensuite, retestes le lancement de phpmyadmin.

Florian

WampServer Patch (Screenshots)
Topic EN : www.wampserver.com
Topic FR : www.wampserver.com